Solved

I need to implement a system with a real and fixed sampling frequency of at least 100kHz, using a STM32F103C8T6, for two analog signals. My main question is: what is the most optimal way to implement this system considering that I also need to do processing of those signals ideally on the same board?. I have just a superficial knowledge about the use of timer triggered interrupts but I don’t know how to implement it correctly for two channels and with this high sample rate.I would appreciate in advance if you could answer and provide me please with courses, videos, forums or documentation that could help me to implement this project.

Hallo,I want to update MASTER CMP1 over DMA and the others TIM_x on MASTER-update.New values of CMPx registry are calculated in SysTick_Handler() and should be updated at once.The problem is: MASTER update on DMA does not work.Could anyone please look at my tiny project? It is maintained over CubeMX.https://github.com/Maciej1975/HRTIM_3Phase/tree/master Kind Regards

Hello,I have issues installing TouchGFX Designer on Windows 11.I would like to install version 4.19.1 to edit an old project built with this version. When I do, I get the following window running endlessly :I also tried to install latest version (4.23.1) and it works.This makes me assume that version 4.19.1 doesn't support Windows 11. Am I right ?I tried to get some information on that topic in TouchGFX documentation but I haven't found an answer so far.Thank you for your answers 

Hello,STM8S208RB.How can you read the AF bit in the I2C_SR2 register?When I try to read this bit, it is always 0 even if this bit is set to 1 (In debug mode I look at this bit that it is set to 1). For example, the following condition always gives the result: 0b00000000. The result is always 0b00000000 even if the AF bit is set to 1. Why? 

Hello. Why STM32CubeIDE suggesting me to autocomplete u (unsigned type) as a u_int32_t if it doesn't built? However uint32_t works well. What is the difference using u_intXX_t and uintXX_t?

Hello ST Community,I hope this message finds you well. I am facing an issue on my STM32H7B3I-DK board after integrating a GUI interface generated by TouchGFX 4.21.3 Designer. I would greatly appreciate any insights or assistance in resolving this issue.Board Description:I am working on an STM32H7B3I-DK development board.Problem Description:After generating the GUI interface and its tasks using TouchGFX Designer, a hard fault occurs at osKernelStart() function specifically when calling `vTaskStartScheduler()`.Task Definitions and Priorities:Here is an overview of the tasks with priorities:1. `defaultTask`: Priority `osPriorityNormal`2. `GUI_Task`: Priority `osPriorityHigh1`3. `videoTask`: Priority `osPriorityLow`4. `Led`: Priority `osPriorityNormal` : Worked Fine before 5. `ReadSensors`: Priority `osPriorityHigh` : Worked Fine before 6. `DataReceiveTask`: Priority `osPriorityNormal` : Worked Fine before Task Configuration:Tasks are configured using `osThrea

We are working on a custom inverter board based on a B-G431B-ESC1.As we want to have the option to choose between Single-Shunt and Three-Shunt variant for current sensing, I implemented both features as hwVariants, according to the documentation.See the following snippet: { "name": "CurrentSensing", "type": "CurrentSensing", "tRise": 45, "hwVariants": [ { "type": "ThreeShunt_AmplifiedCurrents", "help": "DRV8323RS internal current amplifier is used", "signals": { "CURRENT_AMPL_U": [ { "name": "PA1", "help": "", "cost": 0 } ], "CURRENT_AMPL_V": [ { "name": "PA7", "help": "", "cost": 0 } ], "CURRENT_AMPL_W": [ { "name": "PB0", "help": "", "cost": 0 } ] }, "shuntResistor": 0.001, "amplifyingNetworkImax": 40, "amplifyingNetworkVm": 3.3, "amplifyingNetworkPrating": 1.4, "offsetNetworkAttenuation": 0.571, "opAmpGain": 16, "polarizationOffset": 2.057 }, { "type": "SingleShunt_AmplifiedCurrents", "help": "DRV8323RS internal current amplifier is used", "

Hi team,I have an STM32MP157 board with a Cortex-M4 processor. I have a simple task, which is to toggle the GPIO at maximum speed with accuracy, ensuring that the clock width does not vary.The maximum toggle speed we require is approximately 15ns between the rising and falling edges. Using the Keil IDE, it is possible to achieve this speed with the Nucleo F746ZG board, which has the same speed as the STM32MP157 for the Cortex-M4 processor.I have generated code in Cube IDE, but the speed we achieved for the STM32MP157 Cortex-M4 is slow, around 60ns. The code used to toggle the GPIO in a while loop is as follows:GPIOF->BSRR = LED_Pin << 16;GPIOF->BSRR = LED_Pin;I appreciate any assistance in improving the toggle speed for the STM32MP157 Cortex-M4.Thank you.Kundan Jha

I am trying to perform a firmware upgrade but I keep receiving an error message Error: Rollback to older version of FW detected and not allowed! Is there a way to get around this error? I have added a photo of the stm programmer page. Additionally - can someone please confirm the order of performing an update? Should it be as follows?Upgrade with stm32wb5x_FUS_fw_for_fus_0_5_3.binUpgrade with stm32wb5x_FUS_fw.binUpgrade with (in my case): stm32wb5x_BLE_Stack_full_fw.binCan I just jump to upgrading with stm32wb5x_BLE_Stack_full_fw.bin without the previous two? Thanks a lot as this is really quite the challenge for me currently.  

I have an 8pin IC marked 351 but I do not seem to understand what ST component it is. See the image. I will appreciate any help for identification.

Hi everyone,I am using the STM32C011J4M6 in the SO8N package.I want to use the ADC on a low frequency signal (around 1kHz). My application needs to be very low power so I decided to put a big (around 100kOhms) input resistance on the ADC pin like we can see in the picture below.The problem is that in the datasheet the maximum value of the resistance is 50kOhms.I want to make sure that this maximum value is given only for one ADC clock frequency (35MHz in my case) and that if we lower the ADC frequency we can increase the Rain value. Am I right ? So if I use a 8MHz ADC clock, I can put a 100kOhms input resistance.My second question is about the voltage drop across this resistance Rain. When the Cadc capacitor is charged there will be a current flowing into Rain, so there will be a voltage drop across it.So my question is, when we increase Rain, we lower the input current in the ADC but we increase the voltage drop across Rain so we increase the error. Is it true ?Best regards, 

Hi,Does anyone have any idea how to fix this warning ?Thank you.  

Hi All,I am compiling my code, then I get the error below. As you can see, stm32f4xx.hal_can.h is included under project. But, when I click on open declaration for CAN_HandleTypeDef, it does not take me to the stm32f4xx.hal_can.h file. It is like the .h file is not included in the build. I have confirmed project properties includes stm32f4xx.hal_can.h is under included directories (please see the last snapshot). Could anyone please guide me with this ?Thanks.  arm-none-eabi-gcc "../App/led.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DUSE_HAL_DRIVER -DSTM32F407xx -c -I../Core/Inc -I../Drivers/STM32F4xx_HAL_Driver/Inc -I../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F4xx/Include -I../Drivers/CMSIS/Include -I"C:/Users/bjvyhb/OneDrive - PHINIA/Desktop/FastBit/openBLT/openblt_v011600/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_CubeIDE/my_prog/App" -I"C:/Users/bjvyhb/OneDrive - PHINIA/Desktop/FastBit/openBLT/openblt_v011600/Target/Demo/

Hi, I'm using ADC1 and ADC2 of a STM32F303RE in dual regular simultaneous mode. Each ADC should sample 5 independent channels and a sampling cycle is triggered by software, so I don't use continuous mode.I do get DMA interrupts and everything seems to work fine, except that the buffer which should contain the ADC samples which got transferred by DMA is untouched - no results transferred.adc.c is:   void MX_ADC1_Init(void) { /* USER CODE BEGIN ADC1_Init 0 */ /* USER CODE END ADC1_Init 0 */ ADC_MultiModeTypeDef multimode = {0}; ADC_ChannelConfTypeDef sConfig = {0}; /* USER CODE BEGIN ADC1_Init 1 */ /* USER CODE END ADC1_Init 1 */ /** Common config */ hadc1.Instance = ADC1; hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1; hadc1.Init.Resolution = ADC_RESOLUTION_10B; hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE; hadc1.Init.ContinuousConvMode = DISABLE; hadc1.Init.DiscontinuousConvMode = DISABLE; hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NON

Hello all   I'm a hobbyist with experience as a java programmer and with simple embedded C and C++ experience who's working on a project for the Elektor Magazine STM32 contest and I'm finding myself in over my head and I'm wondering if any of you might be able to point me in the right direction.  I'm building up a project that uses several of the capabilities of the STM32WB5MM-DK board that I'm working with. I decided to built it up step by step so I can understand what I'm doing.   I began with a project that just reads the temperature sensor and outputs the data on the USART1 serial terminal. This was my first success. The next thing I'd like to add is the ability to use the RGB LED. I see that code is in stm32wb5mm_dk.c in one of the demo projects. So I put a copy of stm32wb5mm_dk.c into Core/Src and I put the corresponding .h file in Core/Inc. Since both Core/Src and Core/Inc already contain files that are part of the project, I assumed that I didn't n

Hello All,I am working on open bootloader. I have copied all required files. When I compile the code on demo project provided by open bootloader, it works just fine. On the other hand, when I compile on my own project, I get the following error.I have compared files and I have noticed that even though I have copied the exact same files, my file has grayed out parts, unlikely to the original file. How can I make the grayed out part seen as normal (white) ?Could you please guide me with that ?    /Loader/ARMCM4_STM32F4/rs232.c:89:3: error: unknown type name 'LL_USART_InitTypeDef'; did you mean 'UART_InitTypeDef'?89 | LL_USART_InitTypeDef USART_InitStruct;| ^~~~~~~~~~~~~~~~~~~~| UART_InitTypeDef../Loader/ARMCM4_STM32F4/rs232.c:106:19: error: request for member 'BaudRate' in something not a structure or union106 | USART_InitStruct.BaudRate = BOOT_COM_RS232_BAUDRATE;| ^../Loader/ARMCM4_STM32F4/rs232.c:107:19: error: request for member 'DataWidth' in something not a struc

I need fastest MCU that can drive GPIO pins but not with timers or DMA, just from source. I need to take fast data from a FPGA device. One of determination is max frequency of toggling pin:I try STM32H562 to toggle pin mode max frequency is around 31 mhz : with this code and core frequency 250mhz:asm volatile(" LDR R0,=0x42020414 ;\n" //GPIOB->ODR " LDR R1,[R0] ;\n""loop: EOR R1,#0x00000001 ;\n"" STR R1,[R0] ;\n"" B loop ;\n":::"r0","r1","r2","r3","r4","r5","r6","r7","r8","r9","r10");I know too STM32H723 is not the best choise - GPIOs are slower than STM32F427. Can some one offer me MCU with fastest GPIOs. and arm core ? Fast as possible.

I have a device with STMF412 processor.This device has UniqueDeviceID [1F 00 23 00 09 51 37 35 31 37 37 36 ]- Contents of the register "Unique device ID register: (96 bits) at address UID_BASE 0x1FFF7A10UL---------------------------------When I boot into the application (USB-CDC communication was generated in CubeIde)and I connect the device to the PC, so I read the following DeviceDescriptor for the USB-CDC deviceDevice Descriptor:  bcdUSB:                     0x0201  bDeviceClass:            0x02  bDeviceSubClass:      0x02  bDeviceProtocol:        0x00  bMaxPacketSize0:     0x40 (64)  idVendor:                    0x0483 (STMicroelectronics)  idProduct:                   0x5740  bcdDevice:      &nbs

Hello, I've been using the RTC lately and it works correctly except for one thing, the alarm. Below you can see the function HAL generatedstatic void MX_RTC_Init(void) { /* USER CODE BEGIN RTC_Init 0 */ /* USER CODE END RTC_Init 0 */ RTC_TimeTypeDef sTime = {0}; RTC_DateTypeDef sDate = {0}; RTC_AlarmTypeDef sAlarm = {0}; /* USER CODE BEGIN RTC_Init 1 */ /* USER CODE END RTC_Init 1 */ /** Initialize RTC Only */ hrtc.Instance = RTC; hrtc.Init.HourFormat = RTC_HOURFORMAT_24; hrtc.Init.AsynchPrediv = 127; hrtc.Init.SynchPrediv = 255; hrtc.Init.OutPut = RTC_OUTPUT_DISABLE; hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; if (HAL_RTC_Init(&hrtc) != HAL_OK) { Error_Handler(); } /* USER CODE BEGIN Check_RTC_BKUP */ /*if (HAL_RTCEx_BKUPRead(&hrtc, RTC_BKP_DR1) != 0xBEBE) { // Write Back Up Register 1 Data HAL_PWR_EnableBkUpAccess(); // Writes a data in a RTC Backup data Register 1 HAL_RTCEx

Hello,I'm studing timer, and I wanna raise an interrupt every second using the Timer1.I write this code in main:rcc->APBENR2 |= RCC_APBENR2_TIM1EN_Msk; //Enable Timer1 clocktimer->CNT = 0;timer->ARR = 1000;// up to 1000timer->PSC |= 16000 - 1;//actual MPU frequency: 16MHztimer->EGR |= TIM_EGR_UG_Msk;timer->DIER |= TIM_DIER_UIE_Msk;//Enable Timer1 interruptNVIC_SetPriority(TIM1_BRK_UP_TRG_COM_IRQn , 0x01);NVIC_EnableIRQ(TIM1_BRK_UP_TRG_COM_IRQn);timer->CR1 |= TIM_CR1_ARPE_Msk | TIM_CR1_CEN_Msk;And this IRQ handler: void TIM1_IRQHandler(void){  printf("INT\r\n");  if (TIM1->SR & TIM_SR_UIF)  {    printf("INT\r\n");    TIM1->SR &= ~TIM_SR_UIF; // Pulisci il flag di overflow  }}The problem is that my code stuck in NVIC_EnableIRQ(TIM1_BRK_UP_TRG_COM_IRQn);I have no information also in debug... Could you help me with this interrupt?Thanks a lot!

STM32CUBEIDE:  version 1.14.1PA0-WKUP ------> UART4_TXPA1 ------> UART4_RXOn a new project when enabling the UART4 with interrupt on receive ,everything is working normal .But once I enable PH1 pin as a GPIO_OUTPUT the UART is not transmitting or receiving any more.Any ideas or help please?Update 1: I attached the two code form comparing.Update 2: if I configure the PH1 pin as input the UART4 will work normal

I am am trying to assess the accuracy of the input capture measurements by capturing a stable periodic pulse, setting the output compare on another channel of the same timer to the measurement, and then measuring the offset on a scope. It appears there is a pretty consistent 25ns lag in the input capture measurement. What primarily drives the lag and should/can this be calibrated out?

Hello,I'm working on a vt100 terminal emulator,  so I created a custom widget which decodes input stream and then display it on a TFT-LCD by LTDC. It works fine alone,  after a custom keyboad added on the top, the simulation will crash when the custom widget try to draw the part under the keyboard, and visual studio throws an exception as shown in the screenshot.what cause this result and how can I avoid it?your help will be appraciated.

Hi,We have an issue with a production build of a VL53L1X based design. The VL53L1X is interfaced to a PIC18F micro, I have inherited the codebase and hardware. The initial production run was for 500 units, of these approx 260 passed our production tests and some have been working well in the field for some time.The remaining 240 all exhibit an almost identical failure mode. Basically the readings will only  1 - Uart Output (Legacy Code - Good Sensor) VTOF=345mm (5989) (0) VTOF=346mm (5978) (0) VTOF=346mm (6020) (0) VTOF=344mm (5949) (0) VTOF=345mm (6153) (0) VTOF=346mm (5979) (0) VTOF=347mm (6098) (0) VTOF=345mm (6147) (0) VTOF=347mm (6176) (0) VTOF=346mm (6166) (0) Min: 344, Max: 347, Avg: 345.70, Std Dev: 0.95   2 - Uart Output (Legacy Code - Bad Sensor) VTOF=652mm (33) (1) VTOF=524mm (48) (0) VTOF=571mm (38) (7) VTOF=496mm (25) (1) VTOF=734mm (23) (1) VTOF=570mm (14) (1) VTOF=604mm (30) (1) VTOF=515mm (19) (1) VTOF=550mm (3) (2) VTOF=587m

Hello,I am new on STM32CubeIDE. I try to use SWV to trace some parameters from Nucleo-H743ZI2. At the beginning, everything is ok. I can see the data in the trace window. But the trace will automatically stop after a certain duration. The board is still running, as I can see the LED still blinking. I am thinking if there is any limitation on the trace duration or data size? Can anyone give me some guide where I should check? Thank you.