Solved

Can you copy screens, objects, and interactions between one TouchGFX project to another? I tried Ctrl + C the objects, but they only seem to copy and paste within the same project window and not from one project window to another.

In our project, it has many screens that have animated container. When the container slides in and covers the whole screen, the widgets beneath the container are still touchable, even though those widgets are "invisible". This does not make sense. Does anybody meet this problem?FYI, we found this problem when the project is almost done, about 50 screens are designed this way. To fix the problem with fewer changes, we created a customed modal window and use it to wrap all the containers. it works, all other widgets are blocked by the modal window. Are we missing something? Any other suggestions? Thanks in advance.

Hello,STM32CubeIDE  1.5.1, latest H7 package for STM32Cube.I have STM32H747-DISC1 board, and STM32CubeMX (in IDE) let me pick max. 36 MHz clock.According to the datasheet STM32H747xI/G datasheet, ADC clock frequency get up to 50 MHz. I overriden frequency on ADC, and it works fine, so I guess this is a bug.

Hi,Is there any pin-to-pin compatible controller available with STM32F072RBTx MCU in ST. Compatible controllers can be with Higher FLASH & RAM size.

How do you change the name of the STM32F4 project that is generated by TouchGFX? I don't see an option to do it in the GUI of TouchGFX because the field for the application name is greyed out: 

I use CUBEIDE 1.3.0 with MCU Package STM32F2 V1.9.0 for Nucleo F207. This package generates a file "stm32f2xx_hal_config.h". In this file, all "USE_HAL_***_REGISTER_CALLBACK" defines are set / not set. What is the proper way to enable these defines? I don't find a switch within the CubeIDE environment. These defines are not in a Begin_user / End-User section. If I enable one, it got overwritten by next time code-generation. Other CPU types like STM32L4 MCU Packages don't generate these defines, I normally set these as global define with the compiler preprocessor settings. With F2xx MCU Package, this does not help. The compiler complains about "redefinition" of these defines. File: stm32f2xx_hal_config.h   #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ #define USE_HAL_USART_REGISTER_CALLBACKS

hi, I am trying to debug the bootloader which comes with sensortile.box to change it for my requirements. In doing so I want to inspect how it works using debug session. But unfortunately, when starting to debug the session the curser doesn't even recognize the main.c func. how to debug a bootloader successfully. I tried with user applications and I can debug...

Dear Motor Control customers and #[STM32 Motor Control]​ community members,We are very glad to announce the new X-Cube Motor Control SDK 5.4.5.This version is fully compatible with new CubeMX 6.1 and is still available at: https://www.st.com/en/embedded-software/x-cube-mcsdk.html .Some issues have been solved such as STM32G4 internal OPAMP configuration and STM32G4 cut2.2 support (added for both MC Workbench and Profiler).Some new power boards have also been added such as STEVAL-IPMM10B, STEVAL-IPMM15B, STEVAL-IPM20B, STEVAL-IPM30B, STEVAL-IPMnM3Q, and STEVAL-IPMnM5Q.Seasons Greetings!STM32 Motor Control Team

Hi,I am looking for the example from the picture below.To save time, I want to reuse the graphics in my application (I guess those graphics are free of use).Thanks!

Dear All,I have tried to make the slide transition effect when a screen is changed to another screen. I set all "Interactions" in TouchGFX designer.Change screenTransition : SlideTransition Direction : Eastother setting are all good.But the screen transition act like "None" transition option."Cover" transition option ==> it works. "Slide" transition option ==> it acts like "None"But one thing, the simulator works fine for evey options.Why "Slide" transition option doen't work? Please give me some advises about this matter.Thanks in advance.FYI, I don't use GFXmmu and I use DMA2D.

I was able to import STMF4DISCOVERY_Ethernet-Phy-SystemWorkbench project into STM32Cube IDE. However, it seems the pathnames are a bit messed up. For example, it failed to find the make file. So is there a cookbook procedure to do this? Or am I better off just using SystemWrokbench?

Is it stored in the FIFO when the threshold of the INT1_THS register is exceeded?Or is it stored regardless of the threshold of the INT1_THS register?

   The TouchGFX uses a Modal window. A TextArear is declared in the Model Window, and the TextArear content is to be changed depending on the circumstances. Is there a way to change the text only in one TextArear?For example) case1 -> Hello, case2 -> Have Nice Day! case3 -> Good Days!~I want to change these text contents and use them.

Is it possible to set I2C SCL and SDA pins to high and low in stm32 to read and write the EEPROM IC. If it is possible plz help me how to do that and how to generate the function to read and write the EEPROM 24c16 IC in stm32.Plz help me.Thank you

Board: STM32WB55-NUCLEO PackI am unable to change the channel being read by the ADC using the included code. I have set the number of conversion to 3 in the ADC configurations. I am not using the DMA but am polling. uint32_t get_battery_voltage(){   sConfig.Channel = ADC_CHANNEL_3 ; sConfig.Rank = 1; if (HAL_ADC_ConfigChannel(&hadc1,&sConfig) != HAL_OK) { Error_Handler(); }   HAL_ADC_Start(&hadc1);   if(HAL_ADC_PollForConversion(&hadc1,5)==HAL_OK){ state.battery_voltage = (double)(HAL_ADC_GetValue(&hadc1)); state.battery_voltage = (state.battery_voltage/4095)*3.3; } HAL_Delay(50);   HAL_ADC_Stop(&hadc1);   return state.battery_voltage; }

What would be an efficient, low latency way to reflect the state of an input pin onto an output pin?Is there anything more automated than configuring the input pin as an EXTI, then in the interrupt handler, reading it and setting the state of the output pin accordingly? Could it be done with a comparator or timer?

I am building uboot spl for DDR testing of a custom board based on the STM32MP157FAD1 MPU. The design uses I2C6 to communicate with the PMIC. The following error occurs: "stm32mp1_clk_get_id: clk id 142 not found". Any suggestions on why the I2C6 clock is "not found" would be appreciated.I2C4/6 are configured for HSI.Full console output:U-Boot SPL 2020.01-stm32mp-r2 (Jan 07 2021 - 16:14:48 -0500)Model: STMicroelectronics custom STM32CubeMX boardstm32mp1_clk_get_id: clk id 142 not foundboard_init_f: probe failed clk=0 reset=0 pinctrl=0 power=-22RAM: DDR3-DDR3L 16bits 533000Khzstm32mp1_clk_get_id: clk id 142 not found0:DDR_RESETDDR>

Hello, I've a question about the HAL-Version FW_L4_V1.15.1. In the file stm32l4xx_hal.c there are defines for the HAL-Version-Number: #define STM32L4XX_HAL_VERSION_MAIN  (0x01U) /*!< [31:24] main version */ #define STM32L4XX_HAL_VERSION_SUB1  (0x0BU) /*!< [23:16] sub1 version */ #define STM32L4XX_HAL_VERSION_SUB2  (0x01U) /*!< [15:8] sub2 version */ #define STM32L4XX_HAL_VERSION_RC    (0x00U) /*!< [7:0] release candidate */ I expected the Numbers (0x01U) (0x0FU) (0x01U) (0x00U) Why the STM32L4XX_HAL_VERSION_SUB1 has a wrong value? Best regards Andreas Fecht

I am trying to get the LIS2DE12 to generate an interrupt when shaken. I have connected the INT1 pin to an open drain I/O pin of my MCU. I an get it to generate the desired interrupt with some reliability. However, when it is just sitting still, it generates interrupts randomly. The ODR is 10 Hz. How might I stop this?Thanks in advance,Rob

Hi,I am trying to get my head around LwIP stack. I am following document "Getting Started with Ethernet on the STM32 Nucleo" by Daniel W Rickey. In Server side includes (SSI) example everything works fine only when I try to access my website by entering IP of my microcontroller ("http://192.168.0.36"). When I try to access it by entering "http://192.168.0.36/index.shtml" (or any other website) page is loaded but SSIs on website are not displayed (SSIHandler is not called when apparently it should be called). I am using NUCLEO-F767ZI development board but I guess it does not matter. LwIP version 2.1.2. Any advice appreciated.Rafal

I am trying to set up a self test process for an assembly including an LIS2DE12. The device works normally when I tilt and invert it. When I try to put it in to self-test mode by writing either 02h or 04h to CTRL_REG4 the readings are the same as with 00h written to CTRL_REG4.I initially tried using the process for the LIS3DH on Page 57 of AN3308 but that says to write 80h to CTRL_REG4, which does not seem to be valid because that would set the BDU bit to 1, not valid for an 8 bit part, and not set either of the self test bits.Can someone please shed some light on whether the self-test function is available with the LIS2DE12 and what I can expect from it.Thanks in advance,Rob

..

..

..

Hi,I want to monitor "TickCounter" value on gauge.In flow, gauge block connected "myVariables"processing block.When start Acquisition, gauge didn't act about value. How to set Value format?