About sushma

sushma · 2024-06-17

I tried enabling the LWIP_SNMP_V3_MBEDTLS and LWIP_SNMP_V3_CRYPTOCan in CubeMX and generated the code, then it is giving me an error as some header files are missing and which are related to MD5 and SHA. In CubeMX, They have mentioned “LWIP_SNMP_V3 ...

sushma · 2024-03-13

Dear Team,I am interfacing Nucleo-h743zi2 board with LCM display(GUI) through UART using Interrupt method.I can transmit the data to LCM and it is displaying properly on the LCM display.Now I am trying to send the commands from LCM display to STM co...

sushma · 2024-02-06

I want to send the character array button_image[] through uart of NUCLEO-H743ZI2 board to the LCM display.Please check the attached button_image.c file for your reference where the array is initialised to corresponding hex data.The array consist of...

sushma · 2024-01-10

I am trying to store .bin file into eeprom(24LC256) which is required for me to flash the LCM GUI. I am trying to open the binary file in main.c as follows: #define Filepath "C:\\Users\\sushma\\STM32CubeIDE\\workspace_1.12.1\\filesizetest\\Core\\Src\...

sushma · 2023-11-22

I want to display the data on web interface with NUCLEO-H743ZI2 board without RTOS . Can anyone please guide me how to configure LWIP, ETH parameters settings in RMII mode and MCU settings, pin configuration.Thank you in Advance!

sushma · 2024-08-19

Dear @STea ,I have opened the file which you shared with me .Please find the attached screenshot for your reference.In that FREERTOS option is enabledRegards,Sushma

sushma · 2024-08-19

Hello @STea ,You have enabled FREERTOS option and then it is enabling the MBEDTLS .I do not want to enable FREERTOS in my project.Please let me know how we can execute it.Regards,Sushma

sushma · 2024-08-19

Hello Tea,Thank you for your reply..ioc file which you gave me is workig fine. I will migrate my project work with the latest cubeMX . Regards,Sushma

sushma · 2024-07-30

Hello Tea,Thank you so much for your reply. Please find the below attached .ioc file for your reference. I used cubeMX v6.8.1 and cubeide v1.11.1. Kindly let me know if you need any information from my side. Regards,Sushma

sushma · 2024-06-12

Can anyone implemented SNMPV3 for STM32. Please share with me if you have done

User statistics

User Activity

SNMPV3 with NUCLEO-H743ZI2 board

UART Synchronisation issue LCM GUI display for NUCLEO-h743zi2 board

How to send the Multiple bytes through UART for flashing LCM display

Storing binary.bin file into eeprom using Nucleoh743zi2

Displaying temperature sensor data on web interface using LWIP

Re: SNMPV3 with NUCLEO-H743ZI2 board

Re: SNMPV3 with NUCLEO-H743ZI2 board

Re: SNMPV3 with NUCLEO-H743ZI2 board

Re: SNMPV3 with NUCLEO-H743ZI2 board

Re: How to implement SNMP v3 on STM32F207