Looking for a programming tool to flash up to 10 MCU STM32 simultaneously

[PATRICK COMBETTE]

Hello

I need to build an automatic programming and testing tool for industry.

Do someone can help me finding a programming tool to flash simultaneously, up to 10 STM32 MCU ?

The binary file is the same for all of them.

I need to integrate the software programming tool through a supplied API for C/C++ (like for STM32CubeProgrammer, I saw it seems exist).

So I'm looging both for hardware and software solution.

THank you in advance for your ideas.

Regards.

[Tesla DeLorean]

For commercial solutions perhaps looks to Segger

I'd probably just make a stand-alone gang programmer with other STM32 and test fixtures.

[MM..1]

STM32CubeProgrammer have CLI and progs have USB ID, you can write cmd script to use multiple STLINKs and prog .

[PATRICK COMBETTE]

Ok thank's for your reply,

I found some product also from ELPTRONIC tools :

https://www.elprotronic.com/pages/st

Do someone know them and already experimented their solution ?

I asked questions on website.... wainting for reply.

Would you have more information about C++ API for STM32CubeProgrammer or do you know where to find ?

THank's a lot.

Patrick

[Sara BEN HADJ YAHYA · Accepted solution]

Hello @PATRICK COMBETTE​ ,

Thanks for your feedback,

For more information about the C++ API, please check the help file (STM32CubeProgrammer_API.chm) provided within the STM32CubeProgrammer package under C:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\api\doc.

I hope this helps !

If your issue is solved, please close this post by clicking the "Select as Best" button. This will help other members of the community find the response more quickly :)

Sara.

[Javier1]

I am tasked with a similar thing overhere, i have two different setups:

• Generic (SWD): (relative simple, not easily scalable)

One raspberry with an stlink + openOCD, a bunch of digital bidirectional multiplexers built in a custom PCB programming fixure,

Then i do a python/bash script for the raspberry to actuate the multiplexers and at the same time flash with openOCD. (this is lighting fast)

• Custom bootloader(Canbus):(not simple, easily scalable)

One custom stm32 running a custom canbus bootloader host, all devices are connected to the same canbus lines and get programmed one after the other (it takes some time).

[PATRICK COMBETTE]

THank you everyone, I found all the information I needed.

I will start the project within LabWindows CVI an test multi programming.

Have a nice day.

[Andrei Chichak]

Softlog Systems makes gang programmers and they make standalone programmers that will program STM32 processors.

I have used their STM32 programmers and they work well.

I have not used their gang programmers, so I cannot comment as to their use with STM32s, but I fully expect that the answer will be yes.

[PATRICK COMBETTE]

Hello,

Thank's for reply and this new suggest.

I'd have a look and then choose depending on avalability and price.

Have a nice day.