Linux 2.6 kernel porting for STR912FW44 based EVB

krishna2399 · ‎2007-10-10

Posted on October 10, 2007 at 22:04

sjo · ‎2011-05-17

Posted on May 17, 2011 at 09:47

your choices are uclinux or ecos, as Krishna says your need a mmu for full linux.

Regards

sjo

mark9 · ‎2011-05-17

Posted on May 17, 2011 at 09:47

give up now, because there is no MMU.

krishna2399 · ‎2011-05-17

Posted on May 17, 2011 at 09:47

Hi Friends,

I would like to know the support for porting linux 2.6 kernel to STR912FW44 based EVB. If so, Please let me know what are points/steps need to care for.

Regards

Krishna M

mark9 · ‎2011-05-17

Posted on May 17, 2011 at 09:47

Krishna,

You've probably seen

http://opensrc.sec.samsung.com/

which talks about the no-mmu port of Linu 2.6 to ARM. However, it doesn't look like it has any development on it for 2 years, and it only supports 1 samsung processor, so there is probably a lot of work to be done.

-Mark

krishna2399 · ‎2011-05-17

Posted on May 17, 2011 at 09:47

Hi

I agree with you on the MMU required for Linux porting. But I came to know that the Linux 2.6 kernel can work without mmu hardware support. I would like to have clarification on this.

For 2.4 kernel MMU hardware support must.

Regards

Krishna M