I would like to only use cgroup v2 and would like to modify the kernel cmdline boot arguments as follows:, . I searched internet and suggestion is to useadd systemd. unified_cgroup_hierarchy=1 under /etc/default/grub , followed by sudo update-grub ....
NOTICE: CPU: STM32MP157FAC Rev.ZNOTICE: Model: STMicroelectronics STM32MP157F-DK2 Discovery BoardINFO: PMIC version = 0x21INFO: Reset reason (0x14):INFO: Pad Reset from NRSTINFO: FCONF: Reading TB_FW firmware configuration file from: 0x2ffe2000INFO: ...
Hi all, we are trying to start our own board running a STM32MP157DAC1We have so far been able to load the TF-A, OPTEE (only when configured in SYSRAM) and u-boot, our starting point is the openst-linux framework (5.0.2 - mickledore), on top of which ...
Dear,I'm starting with OP-TEE on STM32MP15x line. I bring-up the board as described here and built the optee_example_hello_world as described here. However, I got the error code below:TEEC_Opensession failed with code 0xffff0008 origin 0x3Checking th...
i try to flash starter package to our mmc but the error is found i done step by stepin botton text i bold the error please check it once and help me out why this is happend. 10:55:11 : UR connection mode is defined with the HWrst reset mode10:55:...
Got this error in boot log.[ 4.036653] stm32f7-i2c 5c009000.i2c: error -ENOENT: Failed to get controller clock [ 4.054809] stm32f7-i2c: probe of 5c009000.i2c failed with error -25c009000 refers to i2c6. Below is the relevant section in the opte...
We made a new board with STM32MP157FAC1.I tried booting with SD card with STM32MP1 Starter Package image of STM32MP157x-EV1.I am inquiring about the following error. NOTICE: CPU: STM32MP157FAC Rev.ZNOTICE: Model: STMicroelectronics STM32MP157F eval d...
Hi,I wrote a program to toggle GPIO PD13 on the STM32MP157D-DK1 using STM32CubeIDE. I set the Boot pins on the STM32MP157D-DK1 board to Engineering mode and can start a debug session but it seems like the M4 does not toggle GPIO PD13 at all. Its like...
Hello STM Community,I am considering using the STM32MP157F-DK2 as a platform for a LoRa gateway and am curious to know if anyone here has experience with this setup. Specifically, I am interested in integrating the following features and would appre...
I am using OSTL 4.1.1 and build DISTRO=openstlinux-weston MACHINE=stm32mp15-disco. I am using STM32MP157F-DK2. Found that rpmsg_tty build as dyanamic module. I have loaded rpmsg_tty.ko with modprobe but found that node entries are not getting created...