Solved

Hello,I am working on a project for a STM32F767NIHx. I am using the STM32CubeMx tool and validating using RM0410. The problem I am having is that the i2c4_tx peripheral is not listed in dma1 stream5 on page 248 of the reference manual. CubeMx, however, gives dma1 stream5 as an option for the i2c4_tx. If I had to guess, I would say that the reference manual is wrong here and dma1 stream5 channel2 should actually be i2c4_tx instead of i2c4_rx, but I was wondering if someone could verify this for me.Thank you very much for your assistance.

Dear STM, please fix the defines in stm32h7xx_hal_tim_ex.h as at least TIM_TIMx_ETR are either empty or wrong, according to the datasheet. Here is a short example, _NOT_ stating all incorrect positions:NOW, IN THE FILE stm32h7xx_hal_tim_ex.h in STM32Cube_FW_H7_V1.3.2 :#define TIM_TIM5_ETR_GPIO (0x00000000) /* !< TIM5_ETR is connected to GPIO */ #define TIM_TIM5_ETR_SAI2_FSA (0x00000000) /* !< TIM5_ETR is connected to SAI2 FS_A */ #define TIM_TIM5_ETR_SAI2_FSB (0x00000000) /* !< TIM5_ETR is connected to SAI2 FS_B */CORRECT, according to RM0433 Rev 5, p. 1686/3247#define TIM_TIM5_ETR_GPIO (0x00000000) /* !< TIM5_ETR is connected to GPIO */ #define TIM_TIM5_ETR_SAI2_FSA (0x00001000) /* !< TIM5_ETR is connected to SAI2 FS_A */ #define TIM_TIM5_ETR_SAI2_FSB (0x00002000) /* !< TIM5_ETR is connected to SAI2 FS_B */This is a critical bug.Thanks,Maximilian Rest

Posted on January 31, 2018 at 11:17Hello everyone,after update of STM32CubeMX it started to generate simply uncompilable code for TrueSTUDIO.When I select FATFS od FREERTOS and TrueSTUDIO as a IDE, after compilation,functions like HAL_Init(), osThreadCreate(), osKernelStart(), HAL_RCC_OscConfig(), HAL_SD_ReadBlocks_DMA()and similar are marked with errors 'Undefined reference'.However when I choose only SDIO, all HAL functions are compiled without problems.I've got Atollic TrueSTUDIO® for STM32 v9.0.0, hovewer I don't think that problem is in IDE.When I generate code in CubeMX code for MDK-ARM v5, everything compiles without problem.From attached projects, only SAMPLE_SDIO.ioc works.Does someone have similar problem?

Is there any CAN Examples for STM32F1 Series, using the latest HAL Drivers (V1.7)? I see many examples for SPL, but have yet to come across an example with the HAL implementation. Thanks!Target: STM32F103C8T6Configuration done by CubeMx STM32F1, but struggling with the application aspects of the project. Ideally looking to use an interrupt driven implementation.

Hello all,I will start by saying that I am new to STM32 development and that your patience is very appreciated for what I hope is a simple problem.I am working with a X-NUCLEO-NFC05A1 mounted on a NUCLEO-F401RE.I have successfully imported the example project 'Polling' from the X-CUBE-NFC5 software expansion into Atollic TrueStudio and have uploaded the code to the board.The behavior of the compiled code is apparently identical to that of the included binary; everything seems to be working fine in the default configuration.The 'Polling' project has USART debugging on USART2 by default. This is a bit of a problem because in order for the USART2 pins (PA2 and PA3) to be accessed from the NUCLEO-F401RE expansion board's headers, SB62 and SB63 must be closed (I've verified that this works and that I can read USART2), but doing this sacrifices the ST-Link functionailty (which I want to retain).This topic is discussed here: https://os.mbed.com/forum/platform-34-ST-Nucleo-F401RE-community/top

I'm using the SPW04SA module and want to write sensor data to the Azure Storage Table service. To achieve this I have to add special headers to my requests.Until now I couldn't find out if/how this can be done using AT+S.HTTPPOST and AT+S.HTTPGET. As I understand the documentation I can use the files <in_filename> and <out_filename> to achieve this. However I couldn't find an advice, in which format the 'Custom http request" must be present in <out_filename>. (By the way: For the HTTPGET command the meaning of <in_filename> and <out_filename> seems to be swapped. The response body can be found in <in_filename>)

Hi,I'm using CR95HF to comunicate with a ST25DV.I want to write/read the ST25DV mailbox of 256 bytes but the CR95 dont allow.I've been looking in the source code of the CR95HF demo board and found a patch command to increase the buffer.After that if I use the command 0x24 instead the 0x04 (SendRecv) it is possible to send more than 255 bytes.Incredibly I have not found any documentation that explains this patch and how the new commands work.Where I can get that information?Thanks

Hello,I am using a Bootloader which jump to operational application.the Bootloader configures SRAM, so that operational does not need to do it again.Bootloader is baremetal , and operational is freeRTOS.I use IAR.Everything works well if I reset the board, and "Attach debugger to running application".But If I try to: reset board and debug&download the operational application it hangs. It seems that the problem is that on debug&downloading the application all FMC register are set to zeros.But I don't understand who is responsible for setting registers to zero. where in IAR did I configure such reset of registers ? I did not find anything in IAR debugger configuration which explains me this reset of registers values (which were set in bootloader).Thanks for any idea,ranran

..

Hi,all!I'm Using STM32f767 developing touchGFX applications .Using MDK5.By the following the guidence in "https://touchgfx.zendesk.com/hc/en-us/articles/205886201-Placing-Assets-in-Flash-Memory" placing the fronts in extern Flash. sct file config as the following codes:; *************************************************************; *** Scatter-Loading Description File generated by uVision ***; *************************************************************LR_IROM1 0x08000000 0x00100000 {  ; load region size_region ER_IROM1 0x08000000 0x00100000 { ; load address = execution address  *.o (RESET, +First)  *(InRoot$$Sections)  .ANY (+RO)  .ANY (+XO) } RW_IRAM1 0x20000000 0x00080000 { ; RW data  .ANY (+RW +ZI) }}LR_EROM1 0x90000000 0x01000000 { ; load region size_region extflash.bin 0x90000000 0x01000000 { ; load address = execution address  *.o (ExtFlashSection) &nbsp

HiFor some time I have been using the ST-Link programmer from a NUCLEO-L452RE board for programming a custom STM32 board (external MCU). It has been working very well.Recently, I have acquired a NUCLEO-L452RE-P, which has a bit different ST-Link programmer. For instance, it uses a micro USB connector as opposed to a mini connector. Also, it has an extra jumper. But aside from that, they look pretty much the same.The thing is, I cannot get the NUCLEO-L452RE-P programmer to work on the same custom STM32 board. I have connected it the same way as I do for the NUCLEO-L452RE using the same SWD cable. Both ST-Link programmers have the same (latest) firmware V2J33M25.I use Atollic TrueSTUDIO which reports the following error:Error in initializing ST-Link device.Reason: (4) No device found on target.Can anyone explain why they are not compatible?Thanks/ abaldur

Hi I am using STM32Cube V1.0 , version 4.24.0 along with Atollic TrueSTUDIO® for STM32 V9.0. Within Cube I created the project with USB, and created the source code. When I try and compile it I get a bunch of HAL errors, HAL_init() undefined and a bunch of HAL_RCC... commands undefined. I havent done anything different as I have done than creating other projects , straight forward. The .h files seem to be there. Has anyone else have this issue, or know what I have done wrong? ThanksScott

Posted on October 29, 2015 at 11:54In the last version of RM0360,page 722, there is no description about the unique ID. But following the instruction of RM0091 I have read the 96bits ID out in some of my F030C8T6s .These numbers from several chips are different with each other and fit the formation described in the manual-have the same lot number but are different in wafer numbers and x y coordinates. 

Hello,I am using a custom container which is used in most of the screens as TopBar showing various details.The details are varied by using depending on the backend values of the system.Normally, we use Model-Presenter-View for communicating with backend.But how to control the widgets of custom container as there are no presenter/view for it.Thanks,Ameya

I created a custom container in which I placed a scrollwheel.I added in the item template and selected item template both of which use text with wildcard placements.The problem arises when I select these text widgets to use a wildcard buffer at which point multiple identically named buffers are defined in the controls base class which cause the compiler to fail.I have replicated in a small project whch I can zip and email if you say who can deal with this.

When I try to set up quad SPI with dual bank on an STM32H7, I get the following message: "You must select a ChipSelect signal for Dual bank mode first"This is true even for a blank project with nothing else assigned. I don't see anywhere available to select the chip select lines.

Hi all,yesterday I just booted the amazing STM32MP1 DK2 device with a brand new Yocto build (st-image-weston). Can't find the fw_cortex_m4.sh . Is that available just in the STM32CubeMP1_Package or maybe I need to add another layer and build for another target?

Hello, i had no response to that questionHow to go to a view from Model without using modelListennerto go to a view i call a virtual function from modelListenner DISPLAY_MYVIEW that do a call to presenters, and then to views (that then do application().gotoMyView(); )I want to display the MyView screen with a call from the model (on an external event; whatever is the screen currently shown)For that i don't want to call a virtual function from modelListenner: it would mean that have to define in each view and presenter the function DISPLAY_MYVIEW.Is it possible ?thanks for any supportbest regards

I am trying to use ov5640 camera with stm32l4r5 board nucleo-144. The ov5640 has SCCB bus which is similar to i2c. But ov5640 has register with 16bit address (0x300A, 0x300B like this). I used CUBEMX to initialise i2c pins and generated code. How can I communicate with camera using i2c. I am using following code but it is not working.int ov5640_init(I2C_HandleTypeDef *p_hi2c) { sp_hi2c = p_hi2c; int returnValue = 0; uint8_t buffer;   //ov5640_write(0x31, 0x11); //reg = ov5640_write(0x3008, 0x82); HAL_Delay(30);   returnValue = ov5640_read(OV5640_CHIPIDH, &buffer); if (buffer == 0x56) { returnValue = ov5640_read(OV5640_CHIPIDL, &buffer); if (buffer == 0x40) { return 0; } else { return 1; } } else { return 1; } }   static int ov5640_write(uint16_t regAddr, uint8_t data) { HAL_StatusTypeDef ret; do { ret = HAL_I2C_Mem_Write(sp_hi2c, OV5640_WR_ADDR, regAddr, I2C_MEMADD_SIZE_16BIT, &data, 1, 100); } while (ret != HAL_OK &

I am using STM32F407VG board. I wanted to know about the reference voltage and ADC resolution available on this board. I couldn't find the exact info related to these parameters in the datasheets.

Hi,I'm using STM32 Lora Discovery kit to run the code generated by cubemx for RTC, While on debug i'm get the RTC values but when run normally then i'm not getting any values except the initialised values for the time.Thanks & Regards,Vijay Rakesh

I can not detect the UID through the CR95HF_TagDetect sample program. The program only detects the tag type but not the UID as described on page 15/21 of the UM2045 document (Figure 7). Where is this program described whose output is described in figure 7? Thanks to those who want to answer me.

..

If loading the on-chip flash from a .hex file, the Write Memory command can be used to write the hex file data records. However, what should done with the start address? Where does that get written? (Assumming an STM32G0, in my case.)

STEF01 has an interesting price but requires an external power MOSFET for reverse polarity protection. I see from the datasheet that ST has performed some measurements using external FETs, so which one would you recommend?NOTE: This question and answer originated from a customer support case which was handled by us. We regularly review support cases and add any helpful ones here for all to benefit from.