Solved

We do some initial validation of LIS3MDL and experienced a problem when we do a temperature cycle (20°C to 80°C in 20 minutes) in an oven with 7 sensors inside and no external magnetic field present.It seems that we get an offset in the output signal. We have tried to enable the TEMP_EN bit, but the output is more or less the same. In fact, the output does not return to "normal" when the temperature returned to room temperature.Do you have an idea how to fix this problem?NOTE: This question and answer originated from a customer support case which was handled by us. We regularly review support cases and add any helpful ones here for all to benefit from.

I have mentioned, that the STM32CubeMX code generator regenerates header and source files even if there are no changes. This is very annoying, because my version control system always wants to check in the "new" files...I have mentioned this behavior in the macOS Catalina and the Windows 10 version. After I created a new project, this behavior was gone immediately. But I don't want to recreate all my projects now...Best regards!

Hello everyone,I want use USB port as USB OTG but firmware do not support this mode, instead Device and Host modes separately. Where can I read example of USB OTG driver implementation for free?Thanks in advance

My STM32H7 firmware was working and compiling fine before I upgrade my CubeMX firmware package from 1.3.0 to 1.5.0.It seems that the GPIO register struct has been changed and "BSRRH" and "BSRRL" members of the struct do not exist anymore! So my code does not compile! What should I do? E.g. code below:CTRL_N3_GPIO_Port->BSRRL = CTRL_N1_Pin; // SET CTRL_N3_GPIO_Port->BSRRH = CTRL_N2_Pin; // RESETThe error is:Field 'BSRRH' could not be resolved main.cThe struct now only offers "BSRR". How can I solve this problem and why even such major changed made its way into this patch?

Hello.Can someone explain problem by this diagnostics:----------------------------------------bootfailedS-00000001C040CFFENS-0000000000000000°----------------------------------------bootfailedS-00000001C040CFFENS-0000000000000000№----------------------------------------My board say these lines to PA13 pin (9600-8N1) after power up.Flash memory contain [may be] properly formed first stage bootloader file with only infinite loop at starting point.Binary in attachment.

Hello, ​I am doing a project where I will be implementing a trained neural network (trained with Keras) onto a STM32F746-DISCOVERY board with X-Cube AI. The goal is to train the network to recognize audio samples converted into spectrograms. This would mean that on the microcontroller, I would need to convert the audio input into spectrogram images, and then input that into the neural network for recognition.​Does anyone have any good sources or similar projects regarding either creating spectrograms on a STM32 microcontroller or a good image recognition project on an STM32 MCU using x-cube AI?Thank you!

I want to periodically check the state of the RAM ECC detection in my firmware on a STM32H753.The ECC mechanism is well described in the Reference Manual for the Flash but not very well (in my opinion) for the RAM.I've seen that there are dedicated interrupts for RAM ECC but it is not clear if they are triggered for single error or double error ?Also, why a dedicated interrupt and not a BusFault (like it is done on the Flash if I understood correctly ?)Also , I don't want to get interrupted for a single error (that is properly corrected). Instead I want to get the status periodically and log the error somewhere. What is the register to read to check whether a single error happened ?

Hello everyone, I have a question related to MCU oscillator. Honestly, i usually design MCU with external crystal , by belief that it is surely always better internal oscillator. Even i believed that if MCU isn't run with external crystal will make some grumpy designers unhappy. For example, in the past , with UART communication purpose, they often use 11.0592 MHz crystal instead of popular ones like 8Mhz or 16Mhz.But one day, i tried with internal oscillator, i really that i don't know what is the purpose of external crystal ? I'm very sorry if you already met this type of questions and feel annoyed, I also found some similar questions like this in our community, but the answer didn't satisfy me. Thank you all ! Wish you have a nice day :smiling_face_with_smiling_eyes:

Hello,I was using the flash to save the configuration data of my mcu. But I've got two problems:The HAL_FLASHEx_Erase function fails with a sequence error. The first 4 bytes get zeroed with HAL_FLASH_Program. The mcu never boots up after that since the first 4 bytes are the stack pointer.I checked all the parameters and they are all correct. After disabling the interrupts, the function works. While with a high frequency interrupt, the function always fails.However, I never found anything about this in the reference manual as well as the errata. The reference manual says the processor will be paused and the read requests will be processed correctly after the operation is done.Chip is STM32F401RC.Below is my flash layout:|Sect 0-1| 2 | 3 | 4 - ||Bootldr | Cfg1 | Cfg2 | Program code|The erased and programed data is in sector 2. And the code that starts the flash operation is in the last block.

Hi,I would like to know, when STM32CubeMX will support FreeRTOS 10.2.BTW: Is there any roadmap or plan where we can look it up?Best regards

Hello, I am trying to boot kernel via TFTP from U-Boot on my DK2 board, after retrieving PXE configuration file successfully, the uImage failed to retrieved. However, I could successfully get uImage file by u-boot tftp command.​The steps I am following is https://wiki.st.com/stm32mpu/wiki/How_to_boot_the_kernel_via_TFTP_from_U-Boot#pxelinux.cfg_directory.​I have installed tftp servers on my Ubuntu, and the pxelinux.cfg directory, PXE configuration file, uImage, stm32mp157c​-dk2.dtb are all under tftp directory.​​/tftpboot   |---- mmc0_stm32mp157c-dk2.extlinux   | |--------- ​pxelinux.cfg   | |------------ 01-00-80-e1-42-51-72   | |--------- uImage   | |--------- stm32mp157c-dk2.dtb​my PXE configuration file is:menu title Select the boot mode DEFAULT sdcard LABEL sdcard KERNEL uImage FDT stm32mp157c-dk2.dtb APPEND root=/dev/mmcblk0p6 rootwait rw earlyprintk console=ttySTM0,115200The TF-A, u-boot, uImage, dtb file are all released by ST.​​The following is

Hello,I designed a PCB with CR95HF mifare chip, you can see at photo2.JPGand you can see my antenna phisycal dimensions and equivalent inductance at photo3.JPGat eDesing suite it dont seems a right antenna desing. gives warnings.and you can see my antenna circuit schematic at photo4.JPGwith below informations can you say me components values at my antenna circuit schematic at photo4.JPG .if this antenna desing wrong, do you prefer me antenna desing at photo1.JPG?if prefer ptoho1.JPG desing, do you say that; how must i choose component values and which components must be ? could say component values?Thank you, bye.

Hi, I try to add a new layer and a new machine to the STM32MP1 Distribution Image. i followed the following tutorials tutorials:https://wiki.st.com/stm32mpu/wiki/How_to_create_a_new_open_embedded_layerhttps://wiki.st.com/stm32mpu/wiki/How_to_compile_the_device_tree_with_the_Distribution_PackageHowever, I am still getting the following error:WARNING: st-image-core-1.0-r0 do_populate_lic: Could not copy license file /home/user/workspace/STM32MP1/Distribution-Package/openstlinux-4.19-thud-mp1-19-10-09/layers/meta-st/meta-st-stm32mp-addons/conf/eula/stm32mp1-mymachine to /home/user/workspace/STM32MP1/Distribution-Package/openstlinux-4.19-thud-mp1-19-10-09/build-openstlinuxeglfs-stm32mp1-mymachine/tmp-glibc/work/stm32mp1_mymachine-openstlinux_eglfs-linux-gnueabi/st-image-core/1.0-r0/license-destdir/st-image-core/stm32mp1-mymachine: [Errno 2] No such file or directory: '/home/user/workspace/STM32MP1/Distribution-Package/openstlinux-4.19-thud-mp1-19-10-09/layers/meta-st/meta-st-stm32mp-addons

Hi,I'm working with TouchGFX with STM32F746BG, and I have an issue when there is animation.You can find a video of the problem here : https://youtu.be/X-D-NkGCN5kI also have the same issue when I add an animation between screen.At the beginning I was working without TouchGFX (and without external ram), playing with LTDC layer, moving and everything and I no issue.Any idea where this could come from ? TonyEDIT: Updated video to the right one

Ps: I saw https://community.st.com/s/question/0D50X0000BWnXe0SQF/st25ru3993-antenna , but it was not enough.I'm interested in testing the https://www.st.com/en/nfc/st25ru3993.html , but I couldn't find information concerning antenna support. Have anyone used this module to accomplish long distance UHF readings? Can I achieve it with ST25RU3993?I'm searching fora long distance UHF reader, 2 Km <= kilometres <= 10 Km ;a "not so short" distance UHF reader, 2 m <= meters <= 10 m;​Which antennas have you used? Everything goes well?Thanks!

Hello Team,I am using STM32F767ZI Nucleo board in my project.Bootloader flash start address - 0x08000000Bootloader to application jump address - 0x08020200Application flash start address - 0x08020000 Read reset cause snippet: if (__HAL_RCC_GET_FLAG(RCC_FLAG_IWDGRST)) { reset_cause = RESET_CAUSE_INDEPENDENT_WATCHDOG_RESET; } else if (__HAL_RCC_GET_FLAG(RCC_FLAG_SFTRST)) { reset_cause = RESET_CAUSE_SOFTWARE_RESET; } else if (__HAL_RCC_GET_FLAG(RCC_FLAG_PORRST)) { reset_cause = RESET_CAUSE_POWER_ON_POWER_DOWN_RESET; } else if (__HAL_RCC_GET_FLAG(RCC_FLAG_PINRST)) { reset_cause = RESET_CAUSE_EXTERNAL_RESET_PIN_RESET; } else if (__HAL_RCC_GET_FLAG(RCC_FLAG_BORRST)) { reset_cause = RESET_CAUSE_BROWNOUT_RESET; } else { reset_cause = RESET_CAUSE_UNKNOWN; } Clear reset cause snippet:__HAL_RCC_CLEAR_RESET_FLAGS();Jump to application snippet: typedef void (*pFunction)(void);   HAL_RCC_DeInit(); HAL_DeInit(); HAL_MPU_Disable();   uint32_t bootAddress = UINT32_C

I made a simple project with slider and wildcard.Why do I have a "?" instead of the value, even with wildcard range with 0-9Any idea ?

For TextArea with wildcard initial value from resource ID is not displayed.Single use value is working

Hi there, I am working with a customized STM32MP153A board and trying to boot from eMMC.​I had prepared my eMMC following the steps that I found in <u-boot-stm32mp-2018.11-r0 source code directory>/board/st/stm32mp1/README file:​8. Prepare eMMC===============You can use U-Boot to copy binary in eMMC.​In the next example, you need to boot from SDCARD and the images (u-boot-spl.stm32, u-boot.img)are presents on SDCARD (mmc 0) in ext4 partition 4 (bootfs).​To boot from SDCard, select BootPinMode = 1 0 1 and reset.​Then you update the eMMC with the next U-Boot command :​a) prepare GPT on eMMC, example with 2 partitions, bootfs and roots:​ # setenv emmc_part "name=ssbl,size=2MiB;name=bootfs,type=linux,bootable,size=64MiB;name=rootfs,type=linux,size=512" # gpt write mmc 1 ${emmc_part}​b) copy SPL on eMMC on firts boot partition (SPL max size is 256kB, with LBA 512, 0x200)​ # ext4load mmc 0:4 0xC0000000 u-boot-spl.stm32 # mmc dev 1 # mmc partconf 1 1 1 1 # mmc write ${fileaddr} 0 200 #

Hi,I am try adding image on my application with new TouchGFX Designer version. I added image in assets file in project. I can see added image to "Images" tab. But I can't see anything in project tab of widgets image selection.How can i solve this problem?

I am using BlueNRG2 for a project, and using jtag segger as burner/debugger.The application is simple, i have activated all 3 leds and using the microcontroller with sleep mode.but when my system wakes, the red keeps glowing. The code is:BTLE_StackTick(); BlueNRG_Sleep(SLEEPMODE_NOTIMER, wakeup_source, wakeup_level);GPIO_WriteBit(GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_14, Bit_SET);Clock_Wait(1000);GPIO_WriteBit(GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_14, Bit_RESET);Like i said, the red led does not goes off even when system is in sleep mode.

Hi,i am building the code for STM32WB55. I have enabled "Convert to binary file (-O binary)" and "Convert to Intel Hex file (-O hex)".I got 2 files:-bin file - 402MByte size-hex file - 183kByteAs i can see, bin file has 62kByte of real data and rest of data are "0x00". How i can make just normal BIN file? Please help to find out :)--Best regards,Sergii

I am trying to setup DHCP over Ethernet using LwIP, with an ultimate goal of using TCP/UDP for communication. I have configured everything through Cube and set up the MPU according to the FAQ guidelines for Ethernet on STM32H7 and am finally receiving/sending packets.Unfortunately the packets I receive are just raw Ethernet frames w/ no recognizable protocol. I searched around and only found one other post about this and the fix for them was to call LwIP_Process() in the main loop which I am already doing. Here is what wire-shark is capturing on the interface the stm32 is connected to:Here is my MPU Configuration:I have also attached my IOC file, any help will be greatly appreciated.Edit: Providing more context:Buffer definition:ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT] __attribute__((section(".RxDecripSection"))); /* Ethernet Rx DMA Descriptors */ ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT] __attribute__((section(".TxDecripSection"))); /* Ethernet Tx DMA Descriptors */ u

I have a project that runs at 100Mbit, but when I try to connect to a 10Mbit hub, it cannot connect.Any ideas where to look (clocks, MAC, etc)?Thanks