About TKana.1

TKana.1 · 2024-03-25

Hi,Updated from 2.15 today. Having DFU download problem seen attached.Board is recognised but upper right still stated as "Not connected" and download fails.Downgraded to V2.15 and same board connects and downloads OK. OS: W10 64bitBoard: STM32F767NI...

TKana.1 · 2024-03-15

Hi,This value is not defined in the datasheet ( DS14341 - Rev 2 )Figure is attachedAny ideas?Thanks,Tim

TKana.1 · 2024-01-09

Hi,I started working on STM32C011J4.Systick, PWM, ADC, GPIO works just fine. Set pin4 to NRST_MODE 2 via STM32CubeProgrammer (v2.15.0) as GPIO. MCU gets stuck at reset if pin4 is low at power on reset. After applying 1.4V or higher to it momentarily ...

TKana.1 · 2024-07-04

Hi,2.17 works OK with StlinkV2 firmware V2J45S7.Meantime, don't understand why 2.15 updater as of today still shows "no updates available". See attachedBest Regards,Tim

TKana.1 · 2024-03-27

Hi, Checkhttps://community.st.com/t5/stm32cubeprogrammer-mcus/stm32cubeprogrammer-v2-16-dfu-download-problem/td-p/654609 Best Regards,Tim

TKana.1 · 2024-03-26

Hi,Exactly. Mine works on V2.15Best Regards,Tim

TKana.1 · 2024-03-25

Hi,Having a DFU download issue with STM32F767NI that was OK with V2.15. Opened a topicTim

TKana.1 · 2024-01-10

Will help a lot. Would be a disaster for me to find it out after mass production for example

User statistics

User Activity

STM32CubeProgrammer V2.16 DFU Download Problem

STSPIN958 deglitch filter tOCSD (OC protection) period

STM32C011 nRST Problem

Re: STM32CubeProgrammer V2.16 DFU Download Problem

Re: STM32CubeProgrammer 2.16.0 fails to erase sectors

Re: STM32CubeProgrammer V2.16 DFU Download Problem

Re: STM32CubeProgrammer 2.16.0 released

Re: STM32C011 nRST Problem