About Vyacheslav

Vyacheslav · 2023-03-26

I have interesting problem.Custom PCB as master role using SDK 1.15.0.Trying bonding procedure, I find an situatiotion where after ACI_GAP_PAIRING_COMPLETE_VSEVT_CODE event, waiting 100ms (as in "BLE_HeartRateFreeRTOS_ANCS" example) (Ithink it is a m...

Vyacheslav · 2023-02-13

2 years ago it happened that the controller turned to brick. I corresponded with technical support for a long time and I was offered to send the controller to the factory or representative. But since the case was a single one, I did not take advantag...

Vyacheslav · 2021-06-01

Hi!I cannot change Application Structure from "Basic" to "Advanced". Same posts (post1, post2 ) did not solve the problem.

Vyacheslav · 2021-04-20

Hi.Using STM32Cubeprogrammer API v.2.7.0 with STM32WB55 and USB interface, I find an error when to call initOptionBytesInterface()....peripheral_C* options_bytes;options_bytes = initOptionBytesInterface();...As we know, "peripheral_C" structure have ...

Vyacheslav · 2021-04-16

Hi.I want to write desktop application using STM32CubeProgrammer API to load FUS and stack to STM32WB. But in documentation I can`t find any mentioning about how to start FUS, update FUS and load stack.Or does the API do not give this opportunity?

Vyacheslav · 2023-06-02

Unfortunately many HCI commands are not supported.

Vyacheslav · 2023-03-31

Hello, Remy.It`s ok, Remy, but the problem is there : if to call "aci_gap_terminate()" - the CPU2 is not fire any evens. The solution is: only reboot or continue the connection.But sometimes it happens that when to call the "aci_gatt_disc_primary_ser...

Vyacheslav · 2023-02-17

I solved my problem.Thanks to the topichttps://community.st.com/s/question/0D53W00000fnOhSSAU/wireless-stack-recovery-for-stm32wb?t=1676621574060Now I can restore chips.The procedure is as follows:Using STM32CubeProgrammer via ST-Link. - "User Config...

Vyacheslav · 2023-02-17

Hi, Tim.N.Thank you so much for your post.Thanks to him, I started restoring my chips.Best regards,Vyacheslv.

Vyacheslav · 2023-02-16

Hello, Remy.The default FUS in clear chip is 1.2.0 ------------------------------------------------------------------- STM32CubeProgrammer v2.12.0 -------------------------------------------------------------------ST-LINK SN ...

User statistics

User Activity

STM32WB central role freeze when call disconnect after bonding

WB55: Leaving the chip in the brick after loading the stack. Very important for everyone.

Cannot change Application Structure in CubeMX 6.2.1

Functions: initOptionBytesInterface() return a rubbish, firmwareUpgrade() and startWirelessStack() returns not correct result.

How to update FUS or stack on STM32WB using STM32CubeProgrammer API ?

Re: HCI_READ_LOCAL_SUPPORTED_FEATURES shows nothing supported.

Re: STM32WB central role freeze when call disconnect after bonding

Re: WB55: Leaving the chip in the brick after loading the stack. Very important for everyone.

Re: Wireless Stack recovery for STM32WB

Re: WB55: Leaving the chip in the brick after loading the stack. Very important for everyone.