About Anare.1

Anare.1 · 2024-08-10

Hello everyone, I am using NUCLEO-F410RB Board embedding STM32F410RBTx Device and I was trying to port the FreeRTOS bare minimum(kernel w/o CMSIS) api here and it is throwing me an error when I create a bare minimum task(no global variables or arrays...

Anare.1 · 2024-01-03

Configuration:Stm32F767zi board is connected to laptop via LAN connection and no other network is connected.Step1: The IP address , netmask and gateway are same from the ipconfigStep2: Then I have configured the Cubemx based on itcubemx config Issue...

Anare.1 · 2023-08-01

I am using the hts221 with i2c protocol for doing my calculation based on this reference:Application note for calculating relative humidity. Observations:So I tried to read the respective registers and do the calculations as per the datasheet, wit...

Anare.1 · 2023-07-20

Hello everyone,It is a quite basic question, I have this stm32767zi nucleo board with a LAN driver and rj45 connector, and I intend to test the basic ping/web server examples.So for now, I do not have a router with me, so I was wondering, if I could...

Anare.1 · 2021-01-30

Hello folks,I recently bought a stm32f410rb nucleo board and configured it in Linux(Ubuntu 18.04) using eclipse ,CUBEMx, IDE and programmer.Once build is through, I tried downloading the program and the verification is failing here.Could anyone direc...

Anare.1 · 2024-08-11

@Pavel A. Thank you for the information.Yes, that is the plan now!

Anare.1 · 2024-08-10

Hey!! @TDK Actually heap_4 was taking so much memory in my 32KB system that I ha to limit the heap to minimal size. I modified the FreeRTOSConfig.h and it is compiling now for gods sake!!

Anare.1 · 2024-08-10

Thank you so much for the response.This is the Build analyzer w/o calling FreeRTOS tasks, but when I add tasks in to main.c, the code is not even compiling, so I am unable to analyze how much space is occupied.@TDK Can we use Build analyzer with out ...

Anare.1 · 2024-01-03

Thank you very much for time and for the response.I really appreciate it.I have indeed tried that way too, but the symptoms/errors remain the same here.@waclawek.jan wrote:.In other words, STM32 needs to have a 192.168.1.xxx address to be accessible ...

Anare.1 · 2023-07-30

Thank you for your time and efforts to answer my queries, I really appreciate it.

User statistics

User Activity

Compile error: `.bss' will not fit in region `RAM' when adding FreeRTOS tasks

Why is my LwIP ping test for Stm32f767zi giving me a different IP in response?

How do I verify if my hts221 sensor is giving the correct value and my calculations ?

stm32f767zi nucelo ethernet hardware setup : Can we use our laptop as a router for testing?

[Solved]Error: Data mismatch found at address 0x00000000 (byte = 0x20 instead of 0x00)

Re: Compile error: `.bss' will not fit in region `RAM' when adding FreeRTOS tasks

Re: `.bss' will not fit in region `RAM' when adding FreeRTOS tasks

Re: `.bss' will not fit in region `RAM' when adding FreeRTOS tasks

Re: Why is my LwIP ping test for Stm32f767zi giving me a different IP in response?

Re: stm32f767zi nucelo ethernet hardware setup : Can we use our laptop as a router for testing?