I'm using the Board STM32MP157F-DK2 on a Linux Ubuntu 22.04I was trying to follow the 1.3.1 step at 'https://wiki.st.com/stm32mpu/wiki/X-LINUX-AI_Starter_package#Install_all_X-LINUX-AI_packages', when this happened: ~ apt-get install ./apt-openstlinu...
My question is:Can I use PE12 AND PE13 pins as TAMPER_IN type or not ?
optee-stm32mp-addons repository is not available in github. Seems to be deleted or cant be accesed.URL:https://github.com/STMicroelectronics/optee-stm32mp-addons
Hello.I use a board STM32MP157A-DK1. I have SD-card with linux and now i try to run the board in KEIL. I have read file "Using STM32MP1 Cortex-M with Keil MDK". But I get error:Error: flash download failed.Also a can see:Full ship erase done.No Algor...
I'm trying to connect the MP157c-DK2 board in Engineering board. The st link is connected on the CN11 connector.On the st link utility it says detection failed and does not recognize the device.
https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP157C-DK2/Develop_on_Arm%C2%AE_Cortex%C2%AE-M4/Install_STM32Cube_MP1_package There are only a linux path suggested, no windows path. If windows is not supported, then it is not s...
Hi all I have St-link v2 and I am facing a problem for debugging Cortex M in stm32mp157-ev1. I think it is because of the differences between HW Vesion and FW in keil document and my results. In attachment image is mentioned stlink v2-1. Shall...
Hi I would like to debug stm32f7 on Stm32mp157_EV1 board via stlink. according to page 5 of http://www.keil.com/appnotes/files/apnt_319_v1.1.pdf i connected st link then went to Project, Selected St-link and then went to setting dialog, the text bo...
New board STM32MP157A-DK1 bought, trying to connect. First, ST-LINK drivers were updated, then on-board ST-LINK version was updated to last available V2J26M36. MDK cannot connect ("No target connected"), st-link utility cannot see board ("Detection f...
