About Minaihab

Minaihab · 2024-07-12

While connecting the battery, the ground was inverted with the VCC and vice versa. As a result, this capacitor burned out. I need to know the function of this part and if I can continue to work normally after what happened.

Minaihab · 2024-05-01

Hello,I'm having trouble with ADC2 and ADC3 on my NUCLEO-L010RB board. I've utilized all 16 ADCs on the microcontroller, and the code is functioning correctly except for these two ADCs. I am using LPUART.In this image, I obtained a reading of 40 from...

Minaihab · 2024-04-14

I have a problem in my project involving the STM32L010RB MCU and the HC05 Bluetooth module.Currently, the system operates smoothly when connected to the USB port. The HC05 Bluetooth module successfully performs its data transmission and reception tas...

Minaihab · 2024-07-12

How can i Check if it is open-circuit by the meter ?

Minaihab · 2024-05-07

Thanks, I found the answer to my question, and I thought that the problem would be solved. I will ask again if there are any issues after desoldering SB14 and SB13 and soldering solder bridges SB62 and SB63.

Minaihab · 2024-05-07

Hello,Thanks, I think it's my problem. But before doing that, I have a question: Can I run new code on the Nucleo board after desoldering SB14 and SB13?

Minaihab · 2024-05-03

How to Change the solder bridges SB62 and SB63 to allow the ADC in2 and in3 to work as ADCs?

Minaihab · 2024-05-03

i can't send the code but after conducting numerous tests, I've discovered that ADC inputs IN2 and IN3 behave as USART inputs, even when I select ADC mode as indicated above.

User statistics

User Activity

C16 burned in stm32 L010RB

Problem in ADC2 and ADC3

Issue with HC05 Bluetooth Module Communication When Using External Battery

Re: C16 burned in stm32 L010RB

Re: Problem in ADC2 and ADC3

Re: Problem in ADC2 and ADC3

Re: Problem in ADC2 and ADC3

Re: Problem in ADC2 and ADC3