About MBabu.2

MBabu.2 · 2021-06-22

Hey, For a project I am using multiple Vl53L1X sensors from ST and the driver I used is https://github.com/rneurink/VL53L1X_ULD/tree/94b88bc06ef44950ec3a5fd50b2f0287c23c5ad7It worked perfectly and am not having any issues.But am planning to use multi...

MBabu.2 · 2021-04-27

Hello, I hope someone can help me with this.I have 3 VL53l1x and i have connected and programmed all of the 3 sensors to a arduino nano and I am receiving data from all three at the same time.I tried to perform 5x16 RoI for all three VL53L1X sensors ...

MBabu.2 · 2021-04-17

Hello, Is is mandatory to add inter measurement period function when I use the function Timing budget

MBabu.2 · 2021-03-30

I have a 3 VL53L1X satel boards with me .I started testing it out and am facing some minor issues. I saw in the data sheet that I can program the Region of Interest. I am programming it in arduino. I was hoping if I can get a sample code with the pr...

MBabu.2 · 2021-03-24

I cannot understand the term "coverglass crosstalk and smudge beyond 80 cm". Is the glass already in the sensor or does it mean that I can use any glass? Can I program the sensor without setting the preset mode or is it mandatoryThank you so much

MBabu.2 · 2021-04-28

Thank you @John E KVAM so much. I have another doubt for the project , Since I wanted the VL53L1X to be more accurate I added a timing budget of 200 ms . I have 3 vl53l1x sensors and I tested each of them individually and its working perfectly and ...

MBabu.2 · 2021-04-27

Thank you so much.. I was able to program the sensor and its working properly. I am still facing a small issue, I receive the data from the 3 sensors at the same time continuously for 10 minutes and then I get a continuous "00" values for some secon...

MBabu.2 · 2021-03-30

Hello, Does this software work only for ARM processor or can we use the same function in ESP32 alsoThank you

MBabu.2 · 2021-03-28

Thank you so much!!!! I appreciate it...

MBabu.2 · 2021-03-26

Thank You so much, I do have another doubt. The datasheet shows that the VL53L1 give maximum of 8m distance in Full FoV. Will the sensor give the same maximum distance when reducing the FoV or does the distance decrease with the decrease in FoV?Than...

User statistics

User Activity

Vl53l1x sensors from Pololu

Multiple VL53L1X sensors with 5x16 RoI arduino programming

VL53L1X Timing budget, Inter measurement period

Vl53L1X ROI Programming

Hi, I have a VL53L1 board, I looked into the datasheets and it got me confused. I have a few questions and it would be very much helpful if u could explain to me.

Re: VL53L1X Timing budget, Inter measurement period

Re: Multiple VL53L1X sensors with 5x16 RoI arduino programming

Re: Vl53L1X ROI Programming

Re: Hi, I have a VL53L1 board, I looked into the datasheets and it got me confused. I have a few questions and it would be very much helpful if u could explain to me.

Re: Hi, I have a VL53L1 board, I looked into the datasheets and it got me confused. I have a few questions and it would be very much helpful if u could explain to me.