About HHaje.1

HHaje.1 · 2022-08-06

HiI'm getting range status 6 while I'm reading the sensor, which corresponds to (No Update) Status.Test code (kept the necessary debugging prints):int16_t getDistance(void) { int status = VL53L1_StartMeasurement(Dev); uint8_t firstTimeInterrupt ...

HHaje.1 · 2022-08-04

Hi there,Following this topic, I've made a box out of black paper, perhaps it work for calibrating xTalk.We couldn't get the customized paper, but here's the box with side's distance = 25cm. The results of both offset and xTalk are inconsistent, g...

HHaje.1 · 2021-10-07

HiDo we need to calibrate every sensor in the production line, or we just need to make the calibration once to the standard product?Sensor: VL53L1X.Thanks

HHaje.1 · 2021-10-03

HHaje.1 · 2020-12-14

HiI'm having currently 2 projects, One relying mainly on VL53L1X for Tank level monitoring system, (Water and Diesel). And I'm trying VL53l1X to measure people heights. For the first project : The sensor is tested for liquid level monitoring, Which g...

HHaje.1 · 2022-10-21

Hi John, As there's no success by using the cardboard, we're going to make a real test on tanks, talking with the sensors over the Internet.I'm going to alter ROI, Distance Mode, and xTalk calibration data over the Internet, and observe the outcomes...

HHaje.1 · 2022-10-14

Hi John, sorry again for incomplete statement.The over-ranging with narrow FoV is observed at lab setting shared earlier. so there's no real thing it can see further 150 cm, I've made sure that the sensor faces the center of the black paper.I'll try ...

HHaje.1 · 2022-10-14

Thanks for your input, I really need to ensure a point: I don't really perform any kind of calibration set after changing FoV, Should I perform it? (offset calibration, calibration of xTalk with uncalibrated offset returned xTalk of zero (0), as it o...

HHaje.1 · 2022-10-12

Hi there, I've tweaked and implemeted the black page (dull to a percent) better than the previous setup (more flat across the page). So uncalibrated measurements were only down by 1.4% in average, further xTalk calibration has went down to around 121...

HHaje.1 · 2022-10-12

Hi there, Sorry I got so busy just since before you've posted, @Eln.1 .I really didn't make a successful calibration yet, I've done it to one device (results are shown here, setup is different to the question), I'm going to do that for more devices ...

User statistics

User Activity

Range Status 6 with VL53L1X

Is my calibration environment good enough?

VL53L1X calibration process

Hi I've downloaded the latest version of STSW-IMG007 (V2.4.5). I'm facing a portability issues with a previous version (2.3.3). As the X-CUBE-53L1A1's software examples are outdated, how can I use it?/ What should I do? Thanks, Hamza

How is it possible to use VL53L1X for People Height measurement and Diesel tank level measurement ?

Re: VL53L1X calibration process

Re: VL53L1X calibration process

Re: VL53L1X calibration process

Re: VL53L1X calibration process

Re: VL53L1X calibration process