About Parmin Nayani

Parmin Nayani · 2024-04-04

Hello all, I want to take ADC reading at regular intervals based on timer 1 (used OC mode). The timer must trigger the ADC to take a reading and the ADC in turn will trigger the DMA to transfer the ADC reading to memory. To check that the timer is ru...

Parmin Nayani · 2024-04-01

Hi all,Installed the latest CubeIDE and re-built an existing project. Got several warnings. One of them was RWX. This could be solved by making changes to the ,ld file. Example - .ARM (READONLY)The next issues was -- > "_close is not implemented and ...

Parmin Nayani · 2024-02-22

Hello all,First of all, thank you all for helping and educating me on various topics whenever I needed help. This post is on how to rename an output file based on a define in my code. I understand this can be done by bash command(s) post-build, but a...

Parmin Nayani · 2022-12-12

and build analyzer is showing those memory regions. I did not have this problem before. The new project name is AC_2 which is changed from AC_1. Now under build analyzer I see AC_1.elf/AC_2/Debug -27th August -2022, 6:33:40 PM. When I expand the proj...

Parmin Nayani · 2022-11-09

Parmin Nayani · 2024-04-04

Hi SofLit,Thank you very much for sharing the code. I will go through it and revert if I have any questions.

Parmin Nayani · 2024-04-04

Hello Sarra and SofLit, Thank you for your replies. I did a check on the ADC_CR2 bits by reading them. I found the value after all the initializations, to be 0x400. Just the EOCS bit is set. So I did a brute force setting of the EXTEN bits by ADC1->...

Parmin Nayani · 2024-04-01

Hi STTwo-32,Thank you for the update. Now I am not getting the warning. Hopefully nothing else is getting disturbed. Thank you.

Parmin Nayani · 2024-04-01

Here is the project

Parmin Nayani · 2024-04-01

The warning is for stm32f103c8 controller. I have project for 407 but that compiles without warnings.

User statistics

User Activity

STM32F4 ADC DMA and Timer1 trigger

Cube IDE 1.15.0

Post build command

Latest Cube IDE (V1.11.0) is taking a different .elf file and showing wrong memory regions in build analyzer. I have renamed a project long ago and have been using the new named project without any problems. Recent update is now showing older elf file

Hello all, CubeIDE project panel icons have changed. How to get back to original state? I see question marks on some, in some other instances '>' precedes the file name, some show a location name although the folder is in the workspace.

Re: STM32F4 ADC DMA and Timer1 trigger

Re: STM32F4 ADC DMA and Timer1 trigger

Re: Cube IDE 1.15.0

Re: Cube IDE 1.15.0

Re: Cube IDE 1.15.0