CubeMX STM32F2 setting up ADC Bug

[alex_embedded]

Hi All,

I am trying to set up an ADC channel on a specific pin on the STM32F207ZETx; PA0 (pin 34) and I have come across a pretty "big" problem.

When I set the pin and go to configure the pin, the "ADC1" button does not respond to a click and doesn't "look" like it usually does. I have attempted this on different STM32F2 MCUs with the same result. Everything seems fine with the F1 and F3 chips when I set them up.

There is no icon, so to speak, on the button and nothing happens when I click it. To make things worse, once a project is saved like this it cannot be re-opened - it becomes corrupt.

I am using version 4.26.1

For reference this is what it is supposed to look like when there are no issues:

I wasn't sure where to post this, so if it is in the wrong thread I apologise in advance, any solutions would be greatly appreciated!

[Khouloud GARSI]

Dear @alex_embedded​ ,

Many thanks for your feedback! This is the convenient place to report any potential bug you encounter.

I have reproduced the issue you're seeing and I will highlight it internally for further investigation.

We will answer you ASAP.

Thanks!

Khouloud.

[Khouloud GARSI]

Hi @alex_embedded​ ,

Just note that the new release of the STM32CubeMX tool (V4.27.0) is now available under ST website.

Link:

https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-configurators-and-code-generators/stm32cubemx.html

Khouloud.

[Tesla DeLorean]

FYI CubeMX 4.26.1 is NOT recognizing that an update is available, server side database might need updating.

[Khouloud GARSI]

Thanks @Community member​  for bringing this to our attention.

I will report this to our teams immediately.

Khouloud.

[alex_embedded]

Hi All,

Just a quick update,

CubeMX did not find the new version but I did download it and install it manually. My project has been migrated to the new version and I can confirm that the ADC setup appears to be working!

I have no tried to save yet, but I assume it'll save without any troubles. If not I'll let you all know!

Thanks for the help!

[Khouloud GARSI]

Thanks for the update. If you have any feedback, do not hesitate to share it here ;)

Khouloud.

[Tesla DeLorean]

@Khouloud GARSI​ database looks to have been updated over weekend, 4.26.1 has recognized availability of update. Thanks

[Khouloud GARSI]

You're always welcome Clive!