X Nucleo IDW01M1 + Custom Board + Nucleo F767Zi

[engenharia03]

Posted on September 01, 2016 at 22:48

Hi folks, 

I am currently developing a custom expansion board for the F767Zi kit and I plan on using it along with an IDW01M1 board, the problem is I am having trouble finding out which pins from my F767Zi will be dedicated to the IDW01M1 board and which pins will be free for my expansion board. Can anyone help me out with that?So if anyone is interested in this project or can help me out in anyway you are welcome to contribute.  #x-nucleo-idw01m1

[slimen]

Posted on September 02, 2016 at 10:56

Hi eduardoSP,

You should refer to this 

http://www.st.com/content/ccc/resource/technical/document/datasheet/group3/c5/37/9c/1d/a6/09/4e/1a/DM00273119/files/DM00273119.pdf/jcr:content/translations/en.DM00273119.pdf

  from

http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x7/stm32f767zi.html

 page which detailed pin definition in the section (Pinouts and pin description) and Table 10.You can have look at  

http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-idw01m1.html

 page, it maybe helpful for you with User Manual, ''X-NUCLEO-IDW01M1 Quick start user guide'' and 

http://www.st.com/content/ccc/resource/technical/layouts_and_diagrams/schematic_pack/76/c2/19/1a/28/e4/49/71/x-nucleo-idw01m1_schematic.pdf/files/x-nucleo-idw01m1_schematic.pdf/jcr:content/translations/en.x-nucleo-idw01m1_schematic.pdf

 document.Regards

[engenharia03]

Posted on September 02, 2016 at 18:05

Thanks! I found what i needed!