ST-Link and other Cortex-M MCUs

Stathis Voukelatos · ‎2017-05-05

Posted on May 05, 2017 at 11:41

Hi all,

I have a question about the ST-Link debugger/programmer.

Can it be used with any Cortex-M MCU from other manufacturers or is somehow specific to the STM32 family?

Thank you in advance for your support.

#st-link

Nesrine M_O · ‎2017-05-05

Posted on May 05, 2017 at 11:49

Hi

Voukelatos.Stathis

,

The ST-LINK debugger and programmer is specific for the STM8 and STM32 microcontroller families.

-Nesrine-

AvaTar · ‎2017-05-05

Posted on May 05, 2017 at 12:25

Can it be used with any Cortex-M MCU from other manufacturers or is somehow specific to the STM32 family?

IMHO at least worth a try.

About three years ago, I successfully flashed and debugged an NXP1343 (Cortex M3) with a severed on-board ST-Link.

However, the firmware (and hardware) changed at the meantime. Not sure if that still holds with current versions ..

Uwe Bonnes · ‎2017-05-06

Posted on May 06, 2017 at 13:27

Both

and

know the Stlink and can debug/program also a lot of other devices via SWD.

You can also reflash

the stlink as a Black magic debug probe