CR95HF Layout

NM · ‎2021-09-20

Hi,

I need the suggestion such that in my PCB layout, I am trying to put all the RF chip and components will be at center of the antenna. So that I can get more space. If I seen the CR95HF Eval board the antenna part is separate and no other components also placed at the bottom and inside the antennal tracks.

This above type of placement is recommended?

Will you share the PCB guidelines for the CR95HF...

Kind Regards,

Nishanth M

Brian TIDAL · ‎2021-09-20

Hi,

see https://community.st.com/s/question/0D53W00000THvKbSAL/how-to-increase-the-range-of-cr95hf-receiver-on-a-custom-pcb for similar question and for reference on Application notes and various recommandations

Rgds

BT

In order to give better visibility on the answered topics, please click on Accept as Solution on the reply which solved your issue or answered your question.

View solution in original post

Brian TIDAL · ‎2021-09-20

Hi,

see https://community.st.com/s/question/0D53W00000THvKbSAL/how-to-increase-the-range-of-cr95hf-receiver-on-a-custom-pcb for similar question and for reference on Application notes and various recommandations

Rgds

BT

In order to give better visibility on the answered topics, please click on Accept as Solution on the reply which solved your issue or answered your question.

NM · ‎2021-09-21

Hi,

Will you share the PCB file of the X-Nucleo_NFC03A1 & M24LR Discovery Kit. I got only the Gerber file in the website.

Kind Regards,

Nishanth M

Brian TIDAL · ‎2021-09-22

CAD files sent in private message

In order to give better visibility on the answered topics, please click on Accept as Solution on the reply which solved your issue or answered your question.

NM · ‎2021-09-22

Hi,

Thanks....

i got the files..

Kind Regards,

Nishanth M