ST7FMC2R7T6 PA0 and PA2 cannot be configured as PWM or outputs

[pjprv1]

Posted on April 12, 2006 at 01:09

ST7FMC2R7T6 PA0 and PA2 cannot be configured as PWM or outputs

[pjprv1]

Posted on April 12, 2006 at 01:09

Setting the ST7FMC2R7T6 as

PWMCR = 0x00; PADDR = 0x1F; PAOR = 0x0f; PADR = 0x0F; Gives no output on PA0 and PA2 while PA1 and PA3 work The data sheet says these are connected for a TQFP64 device Is this an error in the data sheet or just a bad part?