cancel
Showing results for 
Search instead for 
Did you mean: 

EEPROM IDENTIFICATION

MDT
Visitor
  • Hi, I am trying to get more info on what I believe is EEPROM chip, it is in Haldex 5th generation and trying to find same or similar replacement, as I have more and more faulty, corroded units that I could repair.
  • Any help welcome, Thanks all
1 ACCEPTED SOLUTION

Accepted Solutions

516RQ - Marked ID - M95160-R ?

K525 <- Mfg

https://www.st.com/en/memories/m95160-r.html

M95160-DRDW3TP/K   VCC = 1.7 to 5.5 V    TSSOP8 (169 mils width)

20240714_105724_rotated_shrunk.jpg

Tips, Buy me a coffee, or three.. PayPal Venmo
Up vote any posts that you find helpful, it shows what's working..

View solution in original post

4 REPLIES 4

516RQ - Marked ID - M95160-R ?

K525 <- Mfg

https://www.st.com/en/memories/m95160-r.html

M95160-DRDW3TP/K   VCC = 1.7 to 5.5 V    TSSOP8 (169 mils width)

20240714_105724_rotated_shrunk.jpg

Tips, Buy me a coffee, or three.. PayPal Venmo
Up vote any posts that you find helpful, it shows what's working..

Thank you very much for info, I still wonder if I'll be able to read data from old damaged one🤷‍:male_sign:

 

Hard to say, get some flux, sweat it off, and socket/fixture it or solder it onto any smt breakout board.

Other than that, find a working donor board or someone who's captured one previously. 

Tips, Buy me a coffee, or three.. PayPal Venmo
Up vote any posts that you find helpful, it shows what's working..

I'll see how it goes, it contains vin/coding etc....I will try to read it and if not, I'll get working one and read it from there, then modify, thanks and take care