Other: software

SCTL90N65G2V�?�LTSPICEモデル�?�インストール�?��?��?��?�

SCT040HU65G3AG SCTL90N65G2V�?�LTSPICEモデル�?�インストール�?��?��?��?�教�?��?��??�?��?��?�。SCT040HU65G3AG�?�LTSPICE�?�AutoGenerated機能を利用�?�シミュレーション�?��??るよ�?��?��?�り�?��?��?�。SCTL90N65G2Vも�?�様�?�方法�?�インストール�?��?��?��?��?�エラー�?�発生�?��?��?�。．libファイル�?�修正�?�必�?�?...

STPS2150A �?�X-ray射线照射，内部构造�?�?�

X irradiation was done on this product, and it was found that the position of the arrow was inconsistent. The same batch and the same plate of material were compared. What is the reason for this? Does it affect the performance use

I use the software SmartGrid LabTool to develop ST8500, Auto Detect gets the result No feedback from Target, is there any way to solve it?

ST8500 is developed using the software SmartGrid LabTool, and the result of Auto Detect is No feedback from TargetIs there any solution?current test planReplace another port (port checked)Install other versions of cp2105 to serial driverEnvironment: ...

What is the value of coils from Datasheet is not clear ?

Dears, there is only simulation of DCAC available in ST PowerStudio? can you grant the access of simulating more topologies?

How to add a language in the properties path?

Hi. I dont know how to add a language in the properties settings. The goal is to have added C++, like the following image: Actually I have the languages without the C++: I appreciate the help.Sebastian

STR711FR2T6 has been stopped product.So which new part could replace it？ Hope to get hopeful here.Thanks in advance.

VIPER38HD does not regulate output voltage when increase the output current

I used the ST eDesignSuite to make a o 90V-265V AC power input to +12V with 0.8A and -12V with 0.2A output. So I purchased all the components and soldered the pcb as below,fig1. Soldered PCBCircuit - Schematic which was taken by eDesignSuite as below...

I am using voltage regulator ldk320adu120r for 12 volt o i put 1 micro farad ceramic capaccitor on input and output and when connect power supply on input 13 volt dc i see spark and load curenton input is 200 -300 mA. i even connect load on output 2.2

2.2kilo ohm and no putput voltage on ether case. Please helpZack