Solved

Posted on May 24, 2018 at 05:52We would like to come meet in  France/Europe  maybe in Summer.We would like to meet all the forum moderators and contributors and possibly book a day or two with the HAL engineers.ST would hopefully be paying for the flights and accommodation for some of the more prolific contributors.Then we will be able to work the timeline for the dual display, VR inspired wearable fanless ST-GPU launch.I will bring the flowers.

Posted on May 24, 2018 at 12:42Hello!I am trying to compile the BSP example provided in STM32Cube_FW_F7_V1.11.0/Projects/STM32746G-Discovery/Examples/BSP , but I get the following error: src/log.c:38:10: fatal error: lcd_log.h: No such file or directoryThere is a comment block (in the lcd_log_conf.h) which says:****************************************************************************** * @file BSP/Inc/lcd_log_conf.h * @author MCD Application Team * @brief lcd_log configuration template file. * This file should be copied to the application folder and modified * as follows: * - Rename it to 'lcd_log_conf.h'. * - Update the name of the LCD driver's header file, depending on * the EVAL board you are using, see line40 below (be default this * file will generate compile error unless you do this modification). ******************************************************************************I don't know what name should I update, since there is nothing really on line 40 and the file include

Posted on September 15, 2017 at 10:34Hi everyone,I have a problem with USB MSC device on my stm32l152. I take example from 'STM32Cube_FW_L1_V1.8.0' of USB_Device - MSC_Standalone. In this example the sdcard use SDIO for connect is SD. So I have only change USB_Storage.c for use my SD card connected in SPI. So my change are mainly STORAGE_Read and STORAGE_Write. For the rest of Middleware nothing are change. But when a plug the USB to my PC (Windows 10). It recognize as 'Device USB Mass Storage' but windows say : - Insert Disk in lectorIt not recognize my SDCARD. The logic analizer see the packet of transfert bulk but I thing that the Host doesn't ACK the transfert and then ask a reset. This repeat and repeat. The step are :- SCSI_TEST_UNIT_READY- SCSI_TEST_UNIT_READY- SCSI_TEST_UNIT_READY- SCSI_READ_CAPACITY10- SCSI_READ_CAPACITY10- SCSI_READ10- Reset USBSo do you think it's problem with my change USB_Storage.c or something else ? Thanks a lot,Lo�c#window

Posted on May 16, 2018 at 19:20I'm unable to get my STM32F411 into USB DFU mode on custom hardware. Based on the flow in AN2606 a number of things could be causing this. I've seen a number of references on here with people having issues getting HSE recognized (I have a 4MHz HSE which should be within spec) but I'm not sure how to debug the flow to see where we're getting stuck or what state it's ending up in. Is there a way to do this?

Posted on May 23, 2018 at 08:18Hello, I'm going to develop a kind of solutions for local positioning, and wondering the benefits of using integrated sensors (accelerometer, gyro, and magnetometer) like LSM9DS1 over using individual sensors and gathering.As I can handle each sensor like LSM6DSL and LIS2MDL, I think I can make data like from LSM9DS1.Are the data from LSM9DS1 sensor better in terms of accuracy, speed, or any other things?Thank you for your answer in advance!#mems #lsm9ds1

Posted on January 04, 2017 at 19:51Hi,My vdd calculates to 3.49V but I measure it to 3.30V with a voltmeter.The Vrefint calibration value at 0x1FFFF7BA is 1550.The ADC value I read is 1465, fluctuating +/- 1.Calculation is 3.3V * VrefintCalValue / AdcValue = 3.49VI'm guessing it's my adc read value that is off, not the factory calibration value?MCU is STM32F042G6Ux. ADC code is done in CubeMX.ADC is clocked with a prescaler of /4 and sampletime is 239.5 cycles. So all signals should have plenty of time to settle between samples.Code is inside this link -> http://pastebin.com/G7bSzfyf

Posted on May 19, 2018 at 15:23Hi All,I am new to STM32 family and need your suggestion on selecting a board which I can use to learn and understand USB host and USB device programming and firmware.One day into STM32, I understand that they have a single STM32cube software package which is all I need to evaluate any board/Micro based on STM32. hat is great as all BSP is clubbed together.I was looking at PIC earlier, but STM32 seems more well documented and organized.The board should have below features:- USB host support- USB device support- Ready to use examples for USB devices- If USB examples are FreeRTOS based then thats excellentCheers #usb-development #usb-stack

Posted on April 23, 2018 at 23:04Hi, I have a few questions about the use of the Android SDK for the ST24DV tags.1) readMailboxMessage(0,0) allways returns a first byte which is zero. This zero-first byte seems to come from the tag itself, but I did not find any reference in the datasheet.2) readMailboxMessage(0,1) where argument one is the mailbox adress, and argument two is the amount of bytes to read, never returns anything and the asyncrounous thread in which the function is calles terminates. Why is this?3) fastReadMailboxMessage() and fastWriteMailboxMessage sho the same behavoir as the function call in 2). Is it possible, that these fast operation modes are not supported by my hardware (Huawei Mate 7)?Any help would be very appreciated.Yours, Andreas#fastwritemailboxmessage #readmailboxmessage #first-byte #zero #st25dv #fastreadmailboxmessage

Posted on May 22, 2018 at 02:34Hi,    I am trying to write a flash memory location on an STM32L496 and I can't get it to work.  From reading the manual, I understand that each location can only be written once, and it must be erased before it can be rewritten.  Also, the smallest piece of memory that can be erased is a page, which is 2K on this MCU.  So, I have written some code that reads a copy page I want to write to into RAM, modifies the copy to the desired state, erases the page, then writes the new version to the page using the standard programming API.  This is not working.  The first write works, but the second is returning a HAL_ERROR.  What am I doing wrong?  Any advice is appreciated. I will include a code snippet:bool Nvm::Write(uint32_t destination, uint8_t* source, uint16_t length) { uint32_t start_page_index = GetPage(destination); uint32_t end_page_index = GetPage(destination + length); uint32_t page_start =

Posted on May 22, 2018 at 21:29Hi,Is there a way to generate a condition inside the initialization code generated by CubeMx in TrueSTUDIO?I want to do something like this inside the MX_SPI2_Init() :    if (HAL_GPIO_ReadPin(GPIOI, GPIO_PIN_11) == GPIO_PIN_SET) {            hSPI2.Init.Mode = SPI_MODE_SLAVE;    } else {            hSPI2.Init.Mode = SPI_MODE_MASTER;    }Currently, I can only have one or the other.Is it possible to do it with CubeMx or I should override the generated initialization code by hand?Thank you.#if-else #condition #init #cubemx

Posted on April 25, 2018 at 23:26I downloaded the FP-IND-PLCWIFI1 software.When I try to build the project 'STM32F401RE-Nucleo' there are a number of header files missingsuch as stm32_spwf_wifi.h, stm32Fxx_nucleo.h and relay.h to name a few.I am using:   Atollic TrueSTUDIO® for STM32, Built on Eclipse Neon.1a.   Version: 9.0.1   Build id: 20180420-1214to build the project.Any idea why the files are missing from the .zip?

Posted on May 18, 2018 at 14:54Good morning,I am developing an application that uses STM32F3DISCO as board and FreeRTOS as OS. I want to keep some data in the RAM after some Software reset that I do under some conditions so I have used the notation__attribute__((section('.my_section')))near the variables I want to preserve. Moreover in the linker script I have added a section just after .data and before .bss.my_section (NOLOAD):  {    . = ALIGN(4);    _s_my_section = .;           *(.my_section)    . = ALIGN(4) ;    _e_my_section = .;   } > RAMNow, the application works correctly and the values are preserved but I want to understand more:when I do a reset pressing the button I get my values stored  -> OKwhen I do a power on reset values are more or less random -> OKTo put a 0 in those locations again I have to upload a program without that section defined...is the

Posted on February 26, 2018 at 15:00Hello everybody, I am new in using nucleo's boards and especially F411re. I 'am trying to interface a nrf24L01 module on this board ( not using mbed ), and for now, I'am still lost into the use of the TM_STM32F4_nrf24l01 lib . I am using sw4stm and I wonder if somebody have a complete eclipse projet that could be opened by sw4stm and be loaded on my nucleo f411re? thank a lotBaptiste.#nrf24l01 #nucleo-f411 #stm32f4 #sw4stm32

Posted on May 21, 2018 at 10:33Hello  I am to write  the CLI interface for the ST Link programmer to program an external memory through CLI.'C:\Project\Programming\ST-LINK Utility>ST-LINK_CLI.exe -C -EL MX25L512G_STM32F769I-DISCO.stldr -P C:\Project\Programming\ST-LINK Utility\asset.hex'the CLI Able to load the EL but unfortunately there is no programming is done.'  C:\Project\Programming\ST-LINK Utility>ST-LINK_CLI.exe -C -EL MX25L512G_STM32F769I-DISCO.stldr -P C:\Project\Programming\ST-LINK Utility\asset.hexSTM32 ST-LINK CLI v3.0.0.0STM32 ST-LINK Command Line InterfaceST-LINK SN : 48FF6C067266535216230367ST-LINK Firmware version : V2J27S6Connected via SWD.SWD Frequency = 4000K.Target voltage = 3.1 V.Connection mode : Normal.Device ID:0x451Device flash Size : 2048 KbytesDevice family :STM32F76x' I have tried to move around the command but seem is not working I have tried usimg the GUI Utility & it was programmed successfully. Is there any thing that i did wro

Posted on May 20, 2018 at 19:36Hi, I'm fairly new both to ARM and to C programming, but I'm attempting to write a library to allow me to interface an STM32F103 with a hub-75 RGB LED panel. I know it's possible as I've seen similar projects, but I want to come up with my own code and learn by throwing myself in at the deep end. Predictably, I've gotten stuck fairly early on in the proceedings!As well as several other control lines, I need to be able to shift different bytes of data out to 6 pins simultaneously. Can anyone describe roughly how I could make this happen? I know I can send an individual byte to a port and have it output across 8 pins, but I need to be able to have 6 separate bytes and output each of them of a different pin simultaneously with a shared clock. Any ideas?Thanks,John#hub75

Posted on May 18, 2018 at 01:25Hi all,I find it curious that the code has been taken down. I mean unless it wasn't ST that had uploaded it in the first place.Can someone from ST explain the situation? I am one of the people that had forked the libraries because I thought it was a way to have latest changes.Thank you very much for your time,Sat#dmca #stm32-cube

Posted on May 11, 2018 at 00:27Hi everyone,I'm working with STm32L476RG on the example that I've downloaded from the St official site about the Ranging Satellites (with the expansion board 53L0A1). The problem is, when I try to generate the code with CubeMx for Iar version 8.22.2, the result is this error:'Error[Pe1696]: cannot open source file X-NUCLEO-53L0A1.h'I think this problem can occur if the IAR project has a different version that the project was made on.I tried the next procedure to add the missing file:Project -> Options -> C/C++ compiler -> Preprocessor and add the directories where the files can be found.But the problem is not solved, because there is a new similar error with an other missing file 'mxconstant'.How can I solve this problem?Thank you for attention and hoping that anyone can help me.#x-nucleo-53l0a1 #stm32l476rg #stm32-iar

Posted on May 16, 2018 at 16:13Hi CUBEMX Team,for NucleoL4R5ZI LPUART1 is taking as GPIOC port. It has to be GPIOG port. Please fix this ThanksPhanirajkiran#cubemx #bug

Posted on March 23, 2018 at 09:33

Posted on May 18, 2018 at 16:09Hello, in these days I'm using for the first time Stm32CubeProgrammer and I notice a little problem in version 1.0.0: In the page 'Erasing & Programming' the button 'Browse', used to select the directory where find the .Hex to use in order to program the device doesn't work. Is there any new Softeware version or way to solve the issue?Thank youDamiano

Posted on May 11, 2018 at 02:48It seems that newest cubeMX (4.25.1) can not be install on macOS high sierra(10.13.3). Does any old version works? and please fix the issue of 4.25.1.

Posted on May 16, 2018 at 10:46Hello,I have STM32F7 discovery kit (Discovery kit with STM32F746NG MCU) . I have successfully tested microSDCard withKeil + STM32Cube able to Create/read/Write txt files.I have also through UM1721 'Developing Applications on STM32Cube with FatFs'STM32F746NG MCU has one only SDMMC interface .So I have selected STM32F722VET6 (LQFP-100 Pins) with two SDMMC Interfaces.My requirement is How I can access two microSDCard Simultaneously .I want to copy the data from one SDCard to another SDCard ( or SPI Flash Memory or USB MSD).1) How do I configure and access Multi-Drive Support with FatFS ( Different  volume name or numbers)  with STM32CubeMX ?2) Can I configure and access FATFS with SPI Interface on  any STM32 MCU with STM32Cube ?Thanks in advanceKaran

Posted on May 19, 2018 at 16:21So, I am using STM32F769xxx to run MIPI-DSI display. On the display's datasheet there are power on and off sequences. I am able to get display on and off (so commands are at least somewhat OK), but colors and data on layer are totally messed up. I have good lead on that (wrong configurations as the display normally runs on 4 lanes, MCU has only 2 lanes, I have asked manufacturer about this, they should get back to me soon), but just in case I was wondering about packet footers (checksums).Heres visual aid:So, here's what this looks on code://SETEXTC uint8_t pSETEXTC[4] = {0xB9, 0xFF, 0x83, 0x94}; HAL_DSI_LongWrite(&hdsi, 0x00, DSI_DCS_LONG_PKT_WRITE, 4, 0x3904002C, pSETEXTC);HAL_DSI_Refresh(&hdsi); //Is this necessary?How is that packet footer (PF) implemented on MCU? Do I need to calculate it manually and add two bytes of data at the end of pSETEXTC or does STMs DSI-interface do it for me? I read documents but it was not too clear abou

Posted on May 18, 2018 at 11:05Hi, I would like to use the SWIM port of STM8L001J3 to control an LED.Obviously the same port will also need to be used for debugging and programming.I ask if it is possible to connect the LED directly to the port or if is it better to use a MOS-N (2N7002) to avoid impedance problems?I attach the schematic of the solution with MOS-N.Thank you for your valuable feedback and suggestionsSisto#stm8l001j3-swim

Posted on May 19, 2018 at 06:04Hi !I am using STM32L4R7ZIT6-144 Pin LQFP Package on Keil-MDK, So far all other GPIO ports SET/REST test is normal except Port G with its associated SPI configuration which is neither getting SET nor RESET on push pull ,pull up mode. Although System viewer during debug mode in Keil -MDK showes normal set/reset toggle behavior for PG9/10/11/12 ports but output of the ports is not remains low and unchnaged.I have tested VDDIO supply at pin no 131 and 95 with respect to 130 and 94 which is 3.2V.We have tested it with three different hardware's and found the behavior same.Due to this we are unable to use SPI3 on either of these ports.Please advice!Thanks and Best Regards,VK Verma   ♯‌https://community.st.com/tags♯/?tags=stm32l4%2B‌#stm32l4r7zit6 #stm32l4+