Hi,
I'm working with M24LR Discovery and I would like to Flash demonstration firmware of RF transceiver after erasing flash using STLINK/V2 utility.
I am able to erase the Flash but while I'm trying to Flash the .hex or Binary file, following error message displayed on Log window.
Unexpected error
Error occured during program operation!
below log is for your reference.
15:10:04 : ST-LINK SN : 50FF6D067788545417281567
15:10:04 : V2J34S7
15:10:04 : Connected via JTAG.
15:10:04 : JTAG Frequency = 140 KHz.
15:10:04 : Connection mode : Normal.
15:10:04 : Debug in Low Power mode enabled.
15:10:04 : Device ID:0x410
15:10:04 : Device flash Size : 128KBytes
15:10:04 : Device family :STM32F10xx Medium-density
15:10:15 : Flash memory erased.
15:10:19 : ST-LINK SN : 50FF6D067788545417281567
15:10:19 : V2J34S7
15:10:19 : Connected via JTAG.
15:10:19 : JTAG Frequency = 140 KHz.
15:10:19 : Connection mode : Normal.
15:10:19 : Debug in Low Power mode enabled.
15:10:19 : Device ID:0x410
15:10:19 : Device flash Size : 128KBytes
15:10:19 : Device family :STM32F10xx Medium-density
15:10:22 : Flash memory erased.
15:10:25 : [Demo.hex] opened successfully.
15:10:25 : [Demo.hex] checksum : 0x001F70E8
15:10:27 : Unexpected error
15:10:27 : Error occured during program operation!
Thanks in Advance!!
1 ACCEPTED SOLUTION
Accepted Solutions
