About torgeirs

torgeirs · 2015-12-23

Posted on December 23, 2015 at 17:38Do anybody know if STM32F446 SPDIFRX in to I2S out is possible?The worry is that input samplerate drifts and I2S output samplerate can't be changed without audible artifacts.I know that the clock PLL N and M has f...

torgeirs · 2023-10-07

Thanks:up_arrow:

torgeirs · 2021-08-30

For H753 it is documented like this:3.5.3 Voltage regulator The same voltage regulator supplies the 3 power domains (D1, D2 and D3). D1 and D2 can be independently switched off. Voltage regulator output can be adjusted according to application needs ...

torgeirs · 2016-01-10

Posted on January 10, 2016 at 14:44So that is the solution! Thank you for the answer to the riddle:-)

torgeirs · 2015-12-25

Posted on December 25, 2015 at 20:35From the datasheet 3.27: 'The SPDIF-RX also offers a signal named spdifrx_frame_sync, which toggles at the S/PDIF sub-frame rate that will be used to compute the exact sample rate for clock drift algorithms. 'A pi...

torgeirs · 2015-01-03

Posted on January 03, 2016 at 18:59From 6.2.3 PLL configuration :Since the main-PLL configuration parameters cannot be changed once PLL is enabled, it is recommended to configure PLL before enabling it (selection of the HSI or HSE oscillator as PLL ...

User statistics

User Activity

STM32F446 SPDIFRX to I2S out possible?

Re: DMA is not working on STM32H7 devices

Re: If I try to change frequency to 400 MHz then IDE show popup window: "Frequency searched for is out of range for this VOS range".

Re: STM32F446 SPDIFRX to I2S out possible?

Re: STM32F446 SPDIFRX to I2S out possible?

Re: STM32F446 SPDIFRX to I2S out possible?