About Louie33

Louie33 · 2024-11-15

Hello everyone.Because I need to test a newly purchased SPC560-DISP, I tested several commonly used modulesAnd these is my test devices:Devices Used:MCU: SPC560P-DISPCAN: Kvaser Leaf LightV2I conducted tests on several commonly used modules:PITEIRQPW...

Louie33 · 2024-11-19

Thank you. I previously not consider this is a hardware-related issue. After checking JP22 and JP23, I discovered that their positions were both set to the pins for CAN channel 1, which caused data transmission on CAN channel 0 to fail.

Louie33 · 2024-11-17

Today, I tried using an oscilloscope to measure the CANH waveform.Below are the oscilloscope waveforms from the SPC560P-DISP I already had:The waveform generate normally.Next, I test the newly purchased SPC560P-DISP:Then no waveform was generated on ...

User statistics

User Activity

SPC560P50L5 CAN Module doesn't work successfully

Re: SPC560P50L5 CAN Module doesn't work successfully

Re: SPC560P50L5 CAN Module doesn't work successfully