About jr_engr_mbed

jr_engr_mbed · 2024-09-09

From the beginning, I have been using EWARM to build the external loader. However, when following the provided steps for the QSPI flash type, I couldn't fully adapt to them. So, I imported a GitHub file, changed only the dev_inf.c, and generated the ...

jr_engr_mbed · 2024-09-05

I encountered an issue where an error occurs when only the image data is moved to NOR Flash in the linker. I have already verified that the NOR Flash works correctly in a separate project by toggling the LEDs.In my current TouchGFX project, I enabled...

jr_engr_mbed · 2024-09-04

basically, qspi is know to operate in memory mapped mode. where,fmc_nor flash used to operate in what? is the nand flash is only operates on non memoey mapped mode, where memory needs some driver to access . please, clear this doubt best regards, jr_...

jr_engr_mbed · 2024-09-02

Hi Team,After assigning NOR Flash space in the linker, I created an external loader, tested it, and debugged it in CubeProgrammer. @SofLit suggested to seek help regarding my TouchGFX-related query in a new thread.Is there any reference or guide ava...

jr_engr_mbed · 2024-08-28

HI, For testing and debugging FMC_norflash(MT28EW01aba) with custom h753 board, I used h743i-eval example as it is for read,write,erase, hence, i could read Manufactring code in memory browser, but in live expression i see address is different, so...

jr_engr_mbed · 2024-10-21

here, is update --> i got able to enable norflash and load imgs., what i did is replaces actual flash which is 128mbits which is come along with eval-brd.. so, there is no data mismatch error occur.. so, this error is solved.. thank you.

jr_engr_mbed · 2024-10-20

Hi @GaetanGodart @Tesla DeLorean @SofLit , Here's an update regarding FMC NOR flash: I was successfully able to run NOR flash after changing the NOR flash IC from 1 Gbit to 128 Mbit. I replaced it with the same 56-TSOP package. Now, I can load Touch...

jr_engr_mbed · 2024-10-01

@GaetanGodart here, i get confusion., i got solution that fmc_nor even though it is directly able to access memory to mcu, so, it behaves like memory mapped without any config.. where, you told my nor is in block mode.. which is used for nand type....

jr_engr_mbed · 2024-10-01

@Tesla DeLorean @GaetanGodart Thank you for providing the solution. I need to create a loader specifically for my custom board. I was able to initialize FMC_NOR and successfully read device codes, perform read/write operations, and toggle the LED as ...

jr_engr_mbed · 2024-09-30

No, I didn't manage to make it work. I compressed the image as much as possible to fit it into internal flash, but I still need external memory to store additional data. Today, I realized a few reasons why I was unable to work with NOR flash. I disco...

User statistics

User Activity

how to build right loader for fmc norflash

Error Occurs When IMG Data is Moved to NOR Flash in Linker

fmc_nor flash is able to working in non memory mapped or memory mapped

how to load touchgfx images on fmc_nor flash where external loader is created

didn't properly able to read and write of FMC_norflash @0x60000000

Re: Error Occurs When IMG Data is Moved to NOR Flash in Linker

Re: how to load touchgfx images on fmc_nor flash where external loader is created

Re: how to load touchgfx images on fmc_nor flash where external loader is created

Re: how to load touchgfx images on fmc_nor flash where external loader is created

Re: how to load touchgfx images on fmc_nor flash where external loader is created