About Choppa

Choppa · 2024-01-02

hello, I'm run a STM32H573DK in OEMiROT example.but following errors occured.[INF] TAMPER Activated[INF] BANK 1 secure flash [0, 15] : OB [0, 14][ERR] Unexpected value for secure flash protection so, I find why occurred this error. In the ob_flash_p...

Choppa · 2023-12-18

hello I'm using a STM32H573-DK board for engineering samples. so. I'm run a example this link but provisioning.bat files does not run at 'Step 3 : Provisioning'How to fix this problem?

Choppa · 2024-01-09

you mean. should I MCUBOOT_S_DATA_IMAGE_NUMBER set to 0?but according to example MCUBOOT_S_DATA_IMAGE_NUMBER is set to 1 and I set the MCUBOOT_S_DATA_IMAGE_NUMBER to 0. occured the following problem[INF] TAMPER Activated[INF] Flash operation: Op=0...

Choppa · 2024-01-07

hello, JocelynNo, I didn't change configurations. but I find diffrent points.S_IMAGE_PRIMARY_PARTITION_OFFSET = 0x1a000==> FLASH_AREA_BEGIN_OFFSET = 0x18000 FLASH_AREA_4_SIZE = 0x2000and FLASH_S_PARTITION_SIZE = 0x6000. is this issue causing...

Choppa · 2023-12-20

Sorry solved problems, first SW1 set a position 0 and next set 1 finaly set 0.These processes have not been performed.

Choppa · 2023-12-20

Yes, my board SW1 already set to FLASH (0)

Choppa · 2023-12-19

Hello LEFRERE.how to change SW?Can i see trace and working SW, if i change SW?

User statistics

User Activity

OEMiROT example flash protect sector problem

Error occured while provisioning '.obj files' on STM32H573-DK

Re: OEMiROT example flash protect sector problem

Re: OEMiROT example flash protect sector problem

Re: Error occured while provisioning '.obj files' on STM32H573-DK

Re: Error occured while provisioning '.obj files' on STM32H573-DK

Re: Error occured while provisioning '.obj files' on STM32H573-DK