About MHéna.1

MHéna.1 · 2024-02-23

Hello, I program STM32H743ZGT6 with STM32CUBE IDE Version: 1.12.1.The FLASH1 is full and i want to use FLASH2 => during the compilation i have an error (of course).How can i use FLASH2 ? At the start i grown up the FLASH1 as below but i think its' no...

MHéna.1 · 2022-03-07

Il the decription of the datasheet we can read this text :They are designed for interfacing between electronic controls and power triacs to control resistive and inductive loads for 115 VAC operationsBut in the Typical Application Circuit (figure 12)...

MHéna.1 · 2024-03-11

Hello NTaha.1, Thank you for your response. your solution seems to work. I have tested with some function declared in FLASH2and now i have this result : The size used by FLASH2 grow up and the size free for FLASH1 grow up.Thank you again 

MHéna.1 · 2024-02-27

Unfortunately, it's not possible to deplace the BOOTLOADER => the project has already been industrialised and sent to customers. So we can't change the position of the BOOTLOADER.But, the solution might be to use the FLASH2 for my application and kee...

MHéna.1 · 2024-02-27

Yes, its was a mistakeThe FLASH is defined as below in my projectFLASH (rx) : ORIGIN = 0x08020000, LENGTH = 384KFLASH2 (rx) : ORIGIN = 0x08100000, LENGTH = 512KDTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128KRAM_D1 (xrw) : ORIGIN = 0x24000000, LENG...

MHéna.1 · 2024-02-26

Is it possible to declare or define some data in FLASH2 ?

MHéna.1 · 2024-02-26

In my case i have 2x512KB (STM32H743ZGT6) so it's not contiguous. It's possible to use the FLASH2 with this device ?

User statistics

User Activity

FLASH2 STM32h743

Subject is MOC3021 : What is the typical control voltage ?

Re: FLASH2 STM32h743

Re: FLASH2 STM32h743

Re: FLASH2 STM32h743

Re: FLASH2 STM32h743

Re: FLASH2 STM32h743