About SThie.1

SThie.1 · 2024-08-16

I update to V1.16 and found, that my project cannot compile anymore.Problem are compile errors, double definitions and so on. I did not change the code, just updated and regenerated everything include the code generation of CubeMX ( from within the i...

SThie.1 · 2024-05-10

I have an older code where I use TIM1 in PWM2 mode to generate a frequency for a buzzer connected to the OC Channel4. Code is coming from F051 project.Now I started a new project and wanted to reuse the same principal, but i do not see the function t...

SThie.1 · 2023-08-07

Hi, I want to transfer 64kByte of data from memory to my display controller using SPI and DMA.Everything is working smoothly so far, but I have some problems of understanding, when I try to use the max. number of bytes.So: 64kByte = 65536 Bytes.But t...

SThie.1 · 2023-04-12

We have a battery driven system based on STM32G031K8 and a S2-LP for RF running from a CR2032.I use the shutdown mode to keep power as low as possible. System is done by a reed contact connected to a wake up pin.We want to find out, whether the batte...

SThie.1 · 2021-04-27

Started today with my STEVAL-STWINKT1B, with default firmware and an outdated version of ST BLE Sensor app.I was happy, the app connected and I was able to do a first trial, gather some data and export the data as csv by email.After that, I did an up...

SThie.1 · 2024-08-25

Additional info:Had the same problem after updating to 1.16.0.Resetting the perspective did not help in the first place.I had to close and reopen the perspective after resetting the perspective.After that the hammer is displayed again.

SThie.1 · 2023-05-22

Hi Sarra, thanks for the hints. I was able to apply some of them, however find out difference between leaving standby/shutdown did not work for me, as both performing a reset, deleting my flag.I placed the flag in the 20 bytes option Ram, that was wo...

SThie.1 · 2021-05-09

Sorry to say, but with ST BLE Sensor App V4.10.0 and FW V1.1.0 DTLG110 it does not work anymore. ( tried also manual install of APP V4.6.1 -> not working either )Don't know how to use this demo? Even the *.dat files on the sd card cannot be read by P...

SThie.1 · 2021-04-27

Found a solution:Uninstalled and reinstalled the app.Connected to devicechanged to RSSI/Battery demopressed the disc symbol, then I was asked about some permissions. One of them was access to send emails.Allowed all of them.Now I can send the logs by...

User statistics

User Activity

Compile problems because of linked resources

Enable PWM Output Channel with HAL like formally done with LL_TIM_CC_EnableChannel

transfer 64kb of data via SPI using DMA on STM32H7

How do I find out, that the battery was inserted into my system? = find out the difference between power up and reset after shutdown/standby mode ( G031 )

Logs cannot be exported anymore

Re: In the new STM32CubeIDE, the Eclipse buttons for Build, Rebuild (hammers) and Debug (a bug) are not shown.

Re: How do I find out, that the battery was inserted into my system? = find out the difference between power up and reset after shutdown/standby mode ( G031 )

Re: Logs cannot be exported anymore

Re: Logs cannot be exported anymore