About Reactor

Reactor · 2019-11-20

Get error message "Code generation could not be done because the necessary firmware package is missing. Not able to complete STM32Cube project creation."When Creating STM32Cube Project and then giving Finish will result the followingAlso when downloa...

Reactor · 2020-04-22

Hello there! Thanks a lot for your solution. It is very helpful. I had the same problem.But I made only one change:hadc1.Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR;to hadc1.Init.ConversionDataManagement = ADC_CONVERSIONDATA_DMA_CIRCULAR;I ...

Reactor · 2019-11-21

Try this for L4 https://www.st.com/en/embedded-software/stm32cubel4.html

Reactor · 2019-11-20

Here is solution!1) From this page https://www.st.com/en/embedded-software/stm32cubef4.html download two zips (STM32CubeF4 and Patch-CubeF4)2) Unpack first en.STM32Cube_FW_F4_V1.24.0.zip to Repository folder3) Then unpack en.patch_cubefw_f4.zip to th...

Reactor · 2019-11-20

In two other PC with the same configuration I have no this problem. Also username have spaces and dots and all works fine.---Well... The real problem is IDE can't replace files during unzip.

Reactor · 2019-11-20

Intel Core i3-7100

User statistics

User Activity

Code generation could not be done. Firmware package V1.24.1 can not be unzipped.

Re: STM32H7,STM32H743 ADC with DMA

Re: Code generation could not be done. Firmware package V1.24.1 can not be unzipped.

Re: Code generation could not be done. Firmware package V1.24.1 can not be unzipped.

Re: Code generation could not be done. Firmware package V1.24.1 can not be unzipped.

Re: Code generation could not be done. Firmware package V1.24.1 can not be unzipped.