About SMein.1

SMein.1 · 2022-08-07

In the STM32H745_CM4_Peripherals.xml is an 0x10 address offset... correct is 0x14.That is the reason, that I don't see by debugging the value I wrote to this register.

SMein.1 · 2021-06-05

Due to the current semiconductor shortage the microcontroller STM32H745ZIT6 is not available in the quantity of 210, so I had to buy the variant with higher temperature range. However, the data sheet says in small print that this variant does not sup...

SMein.1 · 2021-03-17

Hello,my problem is that i can't get access to the ADC12_CCR register. I activated the corresponding Clock in the RCC_AHB2ENR register. In addition I compare the addresses of the register from the library with the data of the reference manual, they a...

SMein.1 · 2022-08-07

From CrossWorks Rowley Associates

SMein.1 · 2021-12-05

I tried it and @TDK you are answer is correct, it works without problems with 480MHz!! Thanks!

SMein.1 · 2021-03-19

Ok, i find the fault. The address in the STM32G473xx_Peripherals.xml line was wrong.And with direct addressing in my last minimal code, i also use the wrong address.in this file #include "stm32g473xx.h" the address is correct and equal to the informa...

User statistics

User Activity

Solved: STM32H745 CRC->POL Register wrong address in STM32H745_CM4_Peripherals.xml

Any option to go with STM32H745ZIT3 in VOS0 and VOS1 mode to use the maximum clock frequency in the industrial temperature Range variant.

no write access to ADC12_CCR registers of STM32G473QE

Re: Solved: STM32H745 CRC->POL Register wrong address in STM32H745_CM4_Peripherals.xml

Re: Any option to go with STM32H745ZIT3 in VOS0 and VOS1 mode to use the maximum clock frequency in the industrial temperature Range variant.

Re: no write access to ADC12_CCR registers of STM32G473QE