About DMAYE.1

DMAYE.1 · 2021-02-25

I am following the tutorial for memory to peripheral (UART) from Digikey https://www.digikey.com/en/maker/projects/getting-started-with-stm32-working-with-adc-and-dma/f5009db3a3ed4370acaf545a3370c30cstarting @ 6:00 and ending @ 10:00 minutes inThe tu...

DMAYE.1 · 2021-02-18

Using the latest CUBE-IDEFor what reason would this pop-up be missing? I went through the normal STM project setup and selected my Nucleo board in the selection window all the while using the NEXT option as to not miss any setup options. However the ...

DMAYE.1 · 2021-02-10

The GPIO clock is the only code that seemed to be generated under the initialization function. the other necessary code such as the following was not created. GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitStruct.Pin = GPIO_PIN_8; GPIO_InitStruct....

DMAYE.1 · 2021-02-18

FIGURED IT OUT. It's in the exact manner in which you select the board. You need to double click it and then continue, not just highlight it's individual line in the list. Thanks again, that's a weird quirk BTW. Uhg

DMAYE.1 · 2021-02-18

Maybe try creating a hole new second project with the same board and see if it still appears. There might be some check system that skips over the pop up option do to some variable being set somewhere in the Cube IDE.

DMAYE.1 · 2021-02-18

No, it's as I said. same process and the box does not generate. I'm thinking it's a bug.

DMAYE.1 · 2021-02-12

Thank you so much. That is the issue. I was looking for the pin assignment under the system gpio tabs. It wasn't in that setup. And I think it should be. Thank you once again.

DMAYE.1 · 2021-02-12

Yes, and Thank you in advance! the .ioc file is attached.

User statistics

User Activity

STM32H755 Buffer to DMA to UART3 Setup, not entering interrupt maybe

missing "INITIALIZE ALL PERIPHERALS IN DEFAULT MODE" popup window after selecting new stm32 project for STM32H755ZI-Q Nucleo

Why would cube IDE not generate code for a free and available GPIO pin

Re: missing "INITIALIZE ALL PERIPHERALS IN DEFAULT MODE" popup window after selecting new stm32 project for STM32H755ZI-Q Nucleo

Re: missing "INITIALIZE ALL PERIPHERALS IN DEFAULT MODE" popup window after selecting new stm32 project for STM32H755ZI-Q Nucleo

Re: missing "INITIALIZE ALL PERIPHERALS IN DEFAULT MODE" popup window after selecting new stm32 project for STM32H755ZI-Q Nucleo

Re: Why would cube IDE not generate code for a free and available GPIO pin

Re: Why would cube IDE not generate code for a free and available GPIO pin