About Joerg Wagner

Joerg Wagner · 2024-12-13

Hello,Can someone please provide a working download file for "STM32Cube function pack for STEVAL-PROTEUS1 sensor datalog and file transfer over BLE and USB"?The ZIP-File Version 1.1.0 is corrupt.It cannot be extracted neither on Windows, Linux or Mac...

Joerg Wagner · 2024-10-18

I tried all 3 available demos: default, FP-AI and Datalogger.At last I flashed the original default demo back. All tests are done USB-powered or with LiPo.Establishing a BLE connection with iPhone works in 10% of the cases.Using an Android smartphone...

Joerg Wagner · 2024-10-03

Hello.I have a small fan at home with STEVAL-MKI245A attached and STEVAL-MKI109V3 is near the fan as well,like you would using PROTEUS1.The fan offers 3 mechanical switches to modify the speed.Using the switches causes a stop of reading data from the...

Joerg Wagner · 2023-11-06

libncurses5 and libtinfo5 were replaced by libncurses6 and libtinfo6 in Ubuntu 23.10.No Debug possible anymore inside IDE.Update not yet available.Is it safe to replace version 11.3 of the toolchain with i.e. 13.2?Will it work to overwrite the plugin...

Joerg Wagner · 2023-07-04

1.) HAL_Delay(x) hangs forever when restarting CM4 using Hardware Timer for Systick. Every unit was forced with RESET/RELEASE. Any firmware change could not solve it. Have to repower the board. Happens in Normal and Engineering mode!2.) HAL_Init() ha...

Joerg Wagner · 2024-12-13

Crazy, it's magic.

Joerg Wagner · 2024-12-13

I have the same checksum andjoerg@razer:~/temp$ sha256sum en.fp-sns-datapro1.zip 9a7146747f38dff837cdd3c3aa34f0ae0bde460fa518e7bad130c3d3b9bd6335 en.fp-sns-datapro1.zip joerg@razer:~/temp$ ls -al en.fp-sns-datapro1.zip -rw-r--r-- 1 joerg 65459303 De...

Joerg Wagner · 2024-11-14

Hi Federica,Thank you for the information.Looks good!All issues I mentioned are fixed with STSW-PROTEUS1 v1.1.1.I suggest to use the BLE stack version 1.20.0 from Github project STM32CubeWB, released 5 months ago.Version 1.19.0 would be a downgrade, ...

Joerg Wagner · 2024-10-10

Hi @Federica Bossi ,The adapter board is connected via USB at the notebook which uses it's own battery, no power supply.This means everything is isolated from AC power.It's just a fan (as a vibration source), STEVAL-MKI245 attached to STEVAL-MKI109V3...

Joerg Wagner · 2023-08-18

Open STM32CubeProgrammer and connect via ST-Link.Click on "OB" for Option bytes.Open tab "User configuration" and look for "BCM4" and "BCM7".In your case you want BCM4 to be checked as well as BCM7.Click Apply and Disconnect.

User statistics

User Activity

Function pack FP-SNS-DATAPRO1 Version 1.1.0 zip file corrupt

STEVAL-Proteus1 many issues in demo App

STEVAL-MKI109V3 stops reading from sensor in MEMS Studio

Could not determine GDB version, launch failed on Ubuntu 23.10 : libncurses6

Many issues with STM32MP157F-DK2

Re: Function pack FP-SNS-DATAPRO1 Version 1.1.0 zip file corrupt

Re: Function pack FP-SNS-DATAPRO1 Version 1.1.0 zip file corrupt

Re: STEVAL-Proteus1 many issues in demo App

Re: STEVAL-MKI109V3 stops reading from sensor in MEMS Studio

Re: [STM32H745XI-DISCO] Unable to debug CM4