About Zaher

Zaher · 2023-11-12

I have the latest X-CUBE-SBSFU package and STM32CubeIDE 1.13.2. Building the SECoreBin project has failed with 4 errors and 4 warnings. It looks like several others experienced the same issue with different example projects.Here's the output of the c...

Zaher · 2023-05-25

The following two designs were generated by EDS: Could someone please advise which one is more recommended for powering a LED strip? And can you suggest any off-the-shelf transformer PN that can go with any of these designs?

Zaher · 2023-05-24

Hello everyone! I was wondering what might go wrong with I2S DMA configured in normal mode for audio streaming with double-buffering technique. I'm not talking about circular buffer here (ping-pong) where a single buffer is used in halves in HC and T...

Zaher · 2023-03-28

I believe all of the audio processing addon libs, (SRC236/SRC441) are built without hardware FPU support. The problem is my entire project was built with hard FPU support. I tried the mixed SW/HW, but that didn't solve the issue and I couldn't build ...

Zaher · 2022-11-27

Hi,Why CubeMX forces the TouchGFX generator to the M4 context? I can't uncheck the M4 and assign it to M7 context from within CubeMX. I was wondering if I did something wrong or if this was known issue when generating project with TouchGFX using Cube...

Zaher · 2024-05-28

The following option: 'NO_SW_VBUS_DRIVE_FS' in the latest version of STM32CubeMX has solved this issue!

Zaher · 2024-04-14

I just experienced the same issue with CubeMX 6.9.2, as I generated the project files for Keil uVision, my custom sources were vanished. The problem is, these were not added from another project. They were sources I was working on for the past 8 hour...

Zaher · 2024-04-02

Well, 100 MS/s is not a requirement at all. I was just referring to what 'GPIF' was capable of in another silicon. However, the behavior of the interface and how it's implemented is what concerns me the most. Aside from DMAMUX and the many other opti...

Zaher · 2024-03-31

Could you please name that peripheral and one or more device/series that implements it. I'm doing a lot of parallel and CPLD/FPGA is not an option for me yet. It would be great if the peripheral you're talking about behaves like the GPIF in another s...

Zaher · 2023-11-12

By the way, MDK-ARM project compiles just fine!

User statistics

User Activity

SBSFU > SECoreBin project (latest) build failed with 4 errors - STM32CubeIDE 1.13.2

AC-DC Flyback for powering LED Strip - EDS generated - Review and advice needed...

I2S DMA in NORMAL mode for double-buffering, not halving a single one!

SRC236/441 libs with Hard FPU support?

Assigning TouchGFX to the M7 Runtime context in CubeMX - Dual Core STM32H747

Re: How to configure Drive_VBUS_FS in CubeMX for not driving?

Re: CubeMX 6.9.0 Pulls all my custom files from my Keil uVision U585 project when it modifies my pro

Re: How To Achieve Fast Data Write On GPIO Port With The Fixed Frequency Between 5MHz to 10MHz?

Re: How To Achieve Fast Data Write On GPIO Port With The Fixed Frequency Between 5MHz to 10MHz?

Re: SBSFU > SECoreBin project (latest) build failed with 4 errors - STM32CubeIDE 1.13.2