About zxiao.4

zxiao.4 · 2022-08-11

When I use cmake,/opt/st/stm32mp1/4.0.1-openstlinux-5.15-yocto-kirkstone-mp1-v22.06.15/sysroots/x86_64-ostl_sdk-linux/usr/share/cmake-3.22/Modules/CMakeTestCXXCompiler.cmake:62: error: The C++ compiler "/opt/st/stm32mp1/4.0.1-openstlinux-5.15-yocto-k...

zxiao.4 · 2022-08-02

zxiao.4 · 2022-08-01

Using hexdump /dev/input/event1, you can see the data changes. when I use ts_ test command, "open fbdevice: no such file or directory" will appear. Please help me, I really don't know how to configure it.I am sure that the touch screen monitoring is ...

zxiao.4 · 2022-07-25

zxiao.4 · 2022-07-19

the ssh print:U-Boot 2021.10-stm32mp-r1 (Jul 20 2022 - 10:52:56 +0800)CPU: STM32MP157DAA Rev.ZModel: STMicroelectronics STM32MP157D eval daughterBoard: stm32mp1 in trusted - stm32image mode (st,stm32mp157d-ed1)DRAM: 1 GiBClocks:- MPU : 650 MHz- MCU :...

zxiao.4 · 2022-08-11

I've fixed it. It should be the problem of touch coordinates. I just rotate in the device tree and reverse direction.

zxiao.4 · 2022-08-05

&i2c2 { ft5x06: ft5x06@38 { compatible = "edt,edt-ft5x06","edt,edt-ft5406"; interrupt-parent = <&gpioi>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */ vcc-supply = <&v3v3>; reg = <0x38>; reset-g...

zxiao.4 · 2022-08-04

input device event1 has no enabled output associated (none named), skipping calibration for now.I think this should be the reason for the mistake, but I don't know how to correct it.

zxiao.4 · 2022-08-04

Hi： I use a customized board, similar to stm32mp157d-dk1. Opstlinux 5.15.04 kernel. The error log of Weston is as follows:read-back format: BGRA EGL Wayland extension: yes[13:49:56.022] event0 - gpio-keys: is tagged by udev as: Keyboard[13:...

zxiao.4 · 2022-07-28

Ok,thank you.

User statistics

User Activity

Hi： I can't find qmake in 4.0.1-openstlinux-5.15-yocto-kirkstone-mp1-v22.06.15. When I use qtcreater5.15, I can't create STM32 code.

Hi: Where can I download the compiled "openstlinux eglfs" rootfs for QT image and SDK with eglfs .

Hi: I'm using st-image-weston-openstlinux-weston-stm32mp1.ext4. The USB mouse works, but the touch screen doesn't respond.

Is there a compiled rootfs that contains Qt5 available. Qt5 does not appear in st-image-weston-openstlinux-weston-stm32mp1.ext4

Hi: I use ecosystem 4.0. When I write a program to stm32mp157 through stmcubeprogrammer, the following problems occur: Error: an error occured while uploading data from the virtual partition 0xF1

Re: Hi: I'm using st-image-weston-openstlinux-weston-stm32mp1.ext4. The USB mouse works, but the touch screen doesn't respond.

Re: Hi: I'm using st-image-weston-openstlinux-weston-stm32mp1.ext4. The USB mouse works, but the touch screen doesn't respond.

Re: Hi: I'm using st-image-weston-openstlinux-weston-stm32mp1.ext4. The USB mouse works, but the touch screen doesn't respond.

Re: Hi: I'm using st-image-weston-openstlinux-weston-stm32mp1.ext4. The USB mouse works, but the touch screen doesn't respond.

Re: Is there a compiled rootfs that contains Qt5 available. Qt5 does not appear in st-image-weston-openstlinux-weston-stm32mp1.ext4