About MikeAtETI

MikeAtETI · 2024-03-12

In CubeIDE 1.14, I can build a project in debug configuration (verified by output like 14:55:15 **** Incremental Build of configuration Debug for project ThermaWiFiII **** and file system changes).However, the build analyzer still continues to show m...

MikeAtETI · 2024-03-11

Hi,I'm migrating a headless build script we've used before to 1.14.0 - and it seems to fail with all the targets 2024-03-11T16:43:16.0230489Z /opt/st/stm32cubeide_1.14.0/stm32cubeide -data "/home/vsts/work/1/s/2023firmware/ws/" --launcher.suppressErr...

MikeAtETI · 2023-03-22

Is there an example for the x-cube-azrtos-l4 usbx stack showing how to implement the additional string descriptions and GET_OS_FEATURE_DESCRIPTOR features to allow an HID device to appear as WinUSB?

MikeAtETI · 2023-01-18

On an device running USBX/AzureRTOS, when I plug/unplug it from the computer - it doesn't always come back up device->ux_slave_device_state stays at UX_DEVICE_ATTACHED, and windows gives a Device Descriptor read failed (and a USB device not recognise...

MikeAtETI · 2023-01-16

MikeAtETI · 2024-09-25

Probably a bit late - but if you click on the project file in the tree on the LHS it seems to change the build analayser

MikeAtETI · 2024-03-13

I can confirm I've updated to 1.14.1 and it doesn't make any difference.One thing that may be confusing it, is in the workspace we have two projects, one of which has 'debug' set as its active build configuration, and one has 'release'.

MikeAtETI · 2024-03-13

Hi,I've tried that and it reloaded the release configuration 11:07:22 **** Build of configuration Debug for project ThermaWiFiII **** make -j16 all [...] Finished building target: ThermaWiFiII.elf arm-none-eabi-size ThermaWiFiII.elf arm-non...

MikeAtETI · 2024-03-12

I can confirm removing the spaces, plus a couple of include case issues (build was on linux, cube was on pc)

MikeAtETI · 2023-03-28

To help those who might find by searching, we've made the following modifications and it now shows as WinUSB.See WCID Devices · pbatard/libwdi Wiki (github.com) for more implementation infoIn MX_USBX_Device_Init, after ux_device_stack_class_register ...

User statistics

User Activity

[1.14.0] Build Analyzer picking up wrong build

STM32CubeIDE 1.14.0 headless build

Is there an example for the x-cube-azrtos-l4 for winusb

USBX/AzureRTOS: when plug/unplug from the computer - it doesn't always come back up

USBX - Stopping/Starting PCD/USB for low power Is there "good practice" for shutting down USBX and the USB hardware when the bus is disconnected, so that the micro can go into STOP2 reliably with no excess current consumption.

Re: [1.14.0] Build Analyzer picking up wrong build

Re: [1.14.0] Build Analyzer picking up wrong build

Re: [1.14.0] Build Analyzer picking up wrong build

Re: STM32CubeIDE 1.14.0 headless build

Re: Is there an example for the x-cube-azrtos-l4 for winusb