FAQs
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Flashing stm32wb5x_BLE_Stack_full_fw.bin to wrong address

Go to solution
TK
Associate

‎2024-04-02 03:08 AM

I use stm32wb5x_BLE_Stack_full_fw.bin v1.13.2 on STM32WB5MMG.

The installation address is 0x080CF000.

What happens if I write the stack to the wrong address (0x080C7000, the install address for v 1.13.0).

In my board, it looks work fine. Is there any concern or limitation?

Labels:
0 Kudos
1 ACCEPTED SOLUTION

Accepted Solutions
Go to solution
STTwo-32
ST Employee

‎2024-04-02 07:00 AM

Hello @TK 

First, we always recommend using the stm32wb5x_BLE_Stack_full_fw.bin of the last CubeWB (V 1.19.0).

For the Address, we guarantee that it will work on the communicated address. For other addresses, It may works but we can't guarantee anything. 

Best Regards.

STTwo-32 

To give better visibility on the answered topics, please click on Accept as Solution on the reply which solved your issue or answered your question.

View solution in original post

0 Kudos
1 REPLY 1
Go to solution
STTwo-32
ST Employee

‎2024-04-02 07:00 AM

Hello @TK 

First, we always recommend using the stm32wb5x_BLE_Stack_full_fw.bin of the last CubeWB (V 1.19.0).

For the Address, we guarantee that it will work on the communicated address. For other addresses, It may works but we can't guarantee anything. 

Best Regards.

STTwo-32 

To give better visibility on the answered topics, please click on Accept as Solution on the reply which solved your issue or answered your question.

0 Kudos
Top