send data with STM32F469I-DISCO and EasyCAT Shield

AHADD.1 · ‎2021-11-19

hello

i would like to ask if i can send some data (numbers for exemple ) from my screen STM32F469I-DISCO to my system using EasyCAT Shield (ethercat protocol )

you will find attached photos as an example

best regards

SofLit · ‎2021-11-19

Hello,

The first photo shows a Nucleo board and not a Disco board ;) .

So, if you are really talking about STM32F469I-DISCO board, and EasyCAT has Arduino compatible connectors, you can plug the Shield directly to the STM32F469I-DISCO board since the latter also has Arduino compatible connectors.

To give better visibility on the answered topics, please click on "Accept as Solution" on the reply which solved your issue or answered your question.

View solution in original post

SofLit · ‎2021-11-19

Hello,

The first photo shows a Nucleo board and not a Disco board ;) .

So, if you are really talking about STM32F469I-DISCO board, and EasyCAT has Arduino compatible connectors, you can plug the Shield directly to the STM32F469I-DISCO board since the latter also has Arduino compatible connectors.

To give better visibility on the answered topics, please click on "Accept as Solution" on the reply which solved your issue or answered your question.

AHADD.1 · ‎2021-11-19

yes because I have not yet received the STM32F469I-DISCO. i will use the arduino pin like you said

thank you