TIM_OCMode_Toggle PWM Duty Controll

[stm3223]

Posted on October 05, 2013 at 08:36

I'm an absolutely beginner in microcontrollers.

I want to create a PWM signal wave signal  to drive main power switch at 100Khz TIM1CH1&TIM1CH1N of   STM32F103VC. I change duty (CCR1_Val) but the duty stay same at 50%. Can anybody tell me what I'm doing wrong? Thank You Photo to Attachments vu16 CCR1_Val = 90 ;   TIM_DeInit(TIM1);   /* Time Base configuration */   TIM_TimeBaseStructure.TIM_Prescaler = 0;   TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;   TIM_TimeBaseStructure.TIM_Period = 360 - 1 ; // 72 MHz / 360 = 200 kHz   TIM_TimeBaseStructure.TIM_ClockDivision = 0;   TIM_TimeBaseStructure.TIM_RepetitionCounter = 0;   TIM_TimeBaseInit(TIM1,&TIM_TimeBaseStructure);   /* Channel 1, 2,3 and 4 Configuration in PWM mode */   TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_Toggle ;   TIM_OCMode_PWM1   TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;     TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;   TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;     TIM_OCInitStructure.TIM_OCPolarity = TIM_OCNPolarity_Low;   TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;   TIM_OCInitStructure.TIM_OCIdleState = TIM_OCNIdleState_Set;          TIM_OCInitStructure.TIM_Pulse = CCR1_Val;  // 25%     TIM_OC1Init(TIM1,&TIM_OCInitStructure);   TIM_OC1PreloadConfig(TIM1, TIM_OCPreload_Enable);     /* TIM1 counter enable */   TIM_Cmd(TIM1,ENABLE);   /* Main Output Enable */   TIM_CtrlPWMOutputs(TIM1,ENABLE);

[stm3223]

Posted on October 07, 2013 at 21:03

Thank You very much but I have only TIM1CH1 pin free

I tried

to set TIM8 ( pin CH1 & CH2 free) (photo pin) but error comp. main.c(357): error: #20: identifier ''TIM1_UP_TIM10_IRQn'' is undefined ________________ Attachments : pin.PNG : https://st--c.eu10.content.force.com/sfc/dist/version/download/?oid=00Db0000000YtG6&ids=0680X000006I0dj&d=%2Fa%2F0X0000000bbm%2FmgyuHEhwGLe.R2F8scOCvx0Rj8bUP_oPj9X0KrcIEgg&asPdf=false

[Tesla DeLorean]

Posted on October 07, 2013 at 23:03

The code was for an F4 rather than an F1 part, you will likely need to use a different interrupt designator, like TIM1_UP_IRQn, or TIM4_IRQn, etc, as appropriate, see stm32f10x.h and startup_stm32f10x.s

[waclawek.jan]

Posted on October 08, 2013 at 09:16

> One might suppose, but I've never had much joy with the dead-time settings, so an example doing this would be welcome.

Do you mean ''I tried but it did not work as I expected'', or ''I never had an opportunity/reason to try''? I don't have the reason, but as this is what one would expect as a driving waveform for a bridge, I'd be very surprised if ST wouldn't pay attention to its working. I'd even expect an example to exist somewhere. STM32F10x_StdPeriph_Lib_V3.4.0\Project\STM32F10x_StdPeriph_Examples\TIM\ComplementarySignals\ appears to be such, but as I said, so far I  haven't had the reason to go there. JW

[stm3223]

Posted on October 08, 2013 at 12:39

Not problem JW,

thanks anyway

for help intention

when

you have a question

,

any ideas

welcome

to evaluate

or

test

[Tesla DeLorean]

Posted on October 08, 2013 at 17:05

Do you mean ''I tried but it did not work as I expected'', or ''I never had an opportunity/reason to try''?

Mostly the former, I have experimented with the timers, and tried to digest the documentation/diagrams. The timers only have a singular timing value, and I'm really not sure that I can combine say channel 1&2 and 3&4 to express a start/stop comparison with respect to the time base. I have experimented with dead-time settings, and had more frustration than success.Looking at the motor/pwm, multiple interrupt handlers for TIM1, I've concluded that they expect a much more dynamic interaction with the TIM parameters, rather that being able to set the hardware up once to perform some simple function generation automatically.

[stm3223]

Posted on April 27, 2014 at 19:27