nucleoF411+IKS01A1 :no virtual com port is available for debugging

[su_tou]

Posted on July 07, 2016 at 02:54

Hi,I have one 

nucleoF411

+

IKS01A1

kit.I follow the steps of

IKS01A1

quick start guides(

http://www.st.com/content/ccc/resource/sales_and_marketing/presentation/product_presentation/84/4d/95/53/c4/91/4b/97/x-nucleo-iks01a1_quick_start_guide.pdf/files/x-nucleo-iks01a1_quick_start_guide.pdf/jcr:content/translations/en.x-nucleo-iks01a1_quick_start_guide.pdf

).However, After I connected the board to computer and finished the steps, there is no response. I check the device manager in windows Os and find that the driver of the com port is not properly installed,as depicted in fig.I have tried with

32bits

and 64 bits

win7

 computers , however , it doesn't work. Should I install the

VCP

driver? Any hints would be very grateful, thank you.

[Tesla DeLorean]

Posted on July 07, 2016 at 18:26

The drivers and firmware included in the ST-LINK Utilities v3.9.0 should be sufficient to connect to the board and provide a VCP interface.

[su_tou]

Posted on July 08, 2016 at 03:55

Many thanks clive1, the problem has been worked out , the vcp driver is installed with the pack. The pack is only tried with 64bits win7, and it works.

________________ Attachments : 1.txt : https://st--c.eu10.content.force.com/sfc/dist/version/download/?oid=00Db0000000YtG6&ids=0680X000006HzxY&d=%2Fa%2F0X0000000bRR%2FyHjBlsezx95p2wL7EUQMbD2MpoxrWC225lxruVx.w_g&asPdf=falsemdmcpq.inf : https://st--c.eu10.content.force.com/sfc/dist/version/download/?oid=00Db0000000YtG6&ids=0680X000006HzxT&d=%2Fa%2F0X0000000bRT%2F1SJz.xmyTPqn5JIL7UcTwYxrBU75S6YBtfoqAkhM7sc&asPdf=falseusbser.sys : https://st--c.eu10.content.force.com/sfc/dist/version/download/?oid=00Db0000000YtG6&ids=0680X000006Hzx9&d=%2Fa%2F0X0000000bRQ%2Fgo9W_ieT2ZCtbwxcH82AQXmVDmbQyxPUhqBXUBMnZxs&asPdf=false