Posted on November 02, 2006 at 10:33Hello,
I'm using BSPI0 and BSPI1:
the BSPI1 is working well : we see MOSI / clck / MISO
P0.4 : MISO
P0.5 : MOSI
P0.6 : CLCK
P0.7 : not used in master = 1
P2.4 : CS equipment
GPIO_Config(GPIO0,0x70,GPIO_AF_PP);
BSPI_Init(BSPI1);
BSPI_Enable(BSPI1);
BSPI_MasterEnable(BSPI1,ENABLE);
BSPI_ClkActiveHigh(BSPI1,DISABLE);
BSPI_ClkFEdge(BSPI1,DISABLE);
BSPI_8bLEn(BSPI1,ENABLE);
GPIO_Config(GPIO0,1<
GPIO_BitWrite(GPIO0,0x7,1);
BSPI_TrFifoDepth(BSPI1,8);
BSPI_RcFifoDepth(BSPI1,8);
GPIO_BitWrite(GPIO2,0x4,0);//CS
BSPI_BufferSend(BSPI1,buffer_send,8);
while(BSPI_FlagStatus(BSPI1,BSPI_RFF))==0);
GPIO_BitWrite(GPIO2,0x4,1);//CS
BSPI_BufferReceive(BSPI1,buffer_receive,8);
and with the same configuration for BSPI0 we don't have the clck but we have the MOSI?
P0.0 : MISO
P0.1 : MOSI
P0.2 : CLCK
P0.3 : not used in master = 1
P1.8 : CS equipment
GPIO_Config(GPIO0,0x7,GPIO_AF_PP);
BSPI_Init(BSPI0);
BSPI_Enable(BSPI0);
BSPI_MasterEnable(BSPI0,ENABLE);
BSPI_ClkActiveHigh(BSPI0,DISABLE);
BSPI_ClkFEdge(BSPI0,DISABLE);
BSPI_8bLEn(BSPI0,ENABLE);
GPIO_Config(GPIO0,1<
GPIO_BitWrite(GPIO0,0x3,1);
BSPI_TrFifoDepth(BSPI0,8);
BSPI_RcFifoDepth(BSPI0,8);
GPIO_BitWrite(GPIO1,0x8,0);//CS
BSPI_BufferSend(BSPI0,buffer_send,8);
while(BSPI_FlagStatus(BSPI0,BSPI_RFF))==0);
GPIO_BitWrite(GPIO1,0x8,1);//CS
BSPI_BufferReceive(BSPI0,buffer_receive,8);
I see that the spi clck can also be a i2c : is it from this?
Is the clck of BSPI0 is working on the str710?
thanks
