2021-03-29 06:22 AM
Hi,
I am planning to make subGHz Border router by using Contiki border router example. For Internet, I would like to integrate the Wifi, GSM and Ethernet. I don't want to use Rpi or Beagle bone. I am planning to use STm32 and make my own IPV6 Internet router.
Is there any design notes available?
I am going to integrate subGHz radio to main STM32 with SPI for receiving the IpV6 UDP packets. Extract the data. Connect to internet using GSM/wifi/ethernet. prepare the Json and send it to cloud using MQTT.
Is my understanding is correct?
Any suggestions.
Solved! Go to Solution.
2021-04-07 10:35 PM
Yes, it is possible.
You may be interested in STSW-CONTIKI6LP package, Contiki OS/6LoWPAN on STM32 Nucleo with Sub-1 GHz RF and sensor expansion boards. S2-LP is supported.
https://www.st.com/en/embedded-software/stsw-contiki6lp.html
2021-04-07 10:35 PM
Yes, it is possible.
You may be interested in STSW-CONTIKI6LP package, Contiki OS/6LoWPAN on STM32 Nucleo with Sub-1 GHz RF and sensor expansion boards. S2-LP is supported.
https://www.st.com/en/embedded-software/stsw-contiki6lp.html
2021-04-20 07:39 PM
Hi Winfred,
I have made my own GSM Gateway for 6Lowpan using S2-LP.