I want to debug my SPC563M64 board in SPC5studio. What should I do?

[xqing.1]

I want to debug my SPC563M64 board in SPC5studio. What should I do?

I will go there to obtain support files for boards like SPC58NG

1>C:\SPC5Studio-6.0\openocd\scripts\board\spc58NG_dis.cfg

2>C:\SPC5Studio-6.0\openocd\scripts\target\spc58ng.cfg

3>C:\SPC5Studio-6.0\openocd\scripts\target\spc58.cfg

where can I get these files for  SPC563M64 board just like the above files for  SPC58NG board!!!

[xqing.1]

and where to get  xxx.svd file for SPC563M64 chip   just like C:\SPC5Studio-6.0\openocd\svd\spc58\SPC58NEx_SPC58xGx.svd  for  SPC58 series chip!

[xqing.1]

???

[Erwan YVIN · Accepted solution]

Hello ,

Sorry for the late answer

You should use SPC5-UDESTK

https://www.st.com/en/development-tools/spc5-udestk.html

    Best Regards

                     Erwan

[xqing.1]

yes, i am using SPC5-UDESTK .but i want to use spc5studio and  SPC5-UDESTK   to debug SPC563M64 chip!

the  UDE STK 5.2  have 128KB or 256KB code limited.

but at spc5studio where to get  the following debug/config files just like for SPC56NG_DISP board?

1>C:\SPC5Studio-6.0\openocd\scripts\board\spc58NG_dis.cfg

2>C:\SPC5Studio-6.0\openocd\scripts\target\spc58ng.cfg

3>C:\SPC5Studio-6.0\openocd\scripts\target\spc58.cfg

4>C:\SPC5Studio-6.0\openocd\svd\spc58\SPC58NEx_SPC58xGx.svd

[xqing.1]

can i use stellar emulator to debug SPC563M64 chip use SPC5studio?

[xqing.1]

how about debug SPC563M64 board in SPC5studio? whete get the setting files?