Device specific model ''SPC563M64L7'' not supported!

[luemy]

Posted on August 07, 2014 at 12:03

Hello community,

i try to use the PinMap wizard in SPC5 Studio 3 and i receive the meassage ''Device specific model ''SPC563M64L7'' not supported!'' and it seems that there is no support for any model cause i try it with different cpu's. I use the SPC56M- Discovery board and i'm wondering also that this board is not available in the SPC5Studio Application Wizard. Any ideas? Thanks for your help! - Marc

[Erwan YVIN]

Posted on August 07, 2014 at 13:34Hello Marc ,SPC5Studio is supported SPC563M64L7 .But, the pinmap wizard for SPC563M64L7 is not ready at the current time.it should be available in the following weeks.(Please check your update site)SPC56M- Discovery board is not available on Application Wizard.Anyway, if you want to be compliant with SPC56M- Discovery, you can update the application SPC563Mxx OS-Less test application. (EVB with SPC563Mxx Mini Module)with good clock settings and update the io settings.   Best regards                Erwan Yvin

[luemy]

Posted on August 12, 2014 at 11:25

Thanks a lot for the quick answer!

[Erwan YVIN · Accepted solution]

Posted on September 05, 2014 at 15:39

Hello Marc ,

the pinmap SPC563M64L7 is ready and is available by update site.You can install it from the web by using the command ''Install new software''    Best Regards                     Erwan

[xqing.1]

Error: flash driver 'spc563mxx' not found