STM32CubeIDE (MCUs)

NUCLEO F767ZI BoardSTM32CubeIDE 1.8This problem confused me several days and still not fixed currently.Any help would be appreciated!!ENTRY org.eclipse.cdt.dsf.gdb 4 5012 2022-03-14 15:20:29.503!MESSAGE Error in final launch sequence:Device debug script!STACK 1org.eclipse.core.runtime.CoreException: Device debug script at org.eclipse.cdt.dsf.concurrent.Query.get(Query.java:112) at org.eclipse.cdt.dsf.gdb.launching.GdbLaunchDelegate.launchDebugSession(GdbLaunchDelegate.java:251) at org.eclipse.cdt.dsf.gdb.launching.GdbLaunchDelegate.launchDebugger(GdbLaunchDelegate.java:108) at org.eclipse.cdt.dsf.gdb.launching.GdbLaunchDelegate.launch(GdbLaunchDelegate.java:96) at com.st.stm32cube.ide.mcu.debug.launch.DSFDelegate.launch(DSFDelegate.java:306) at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:803) at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:716) at org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(De

 I’m new to STM32 development so I’ve been using the CubeIDE – Device Configuration Tool to generate most of the code, and HAL calls.I’m using an stm32h747xih (Dual core M7 & M4 Discovery Board) and have being trying to get the ADCs to work. I’ve started with a single shot measurement.My code is below:HAL_ADC_Start(&hadc3); HAL_ADC_PollForConversion(&hadc3, 5000); sine = HAL_ADC_GetValue(&hadc3) - 512; HAL_ADC_Stop(&hadc3);After a lot of fault finding I’ve began to suspect the HAL_ADC_Start call. In this HAL, when this line is executed:/* Enable the ADC peripheral */ tmp_hal_status = ADC_Enable(hadc);tmp_hal_status shows a HAL_ERROR and returns without starting the ADC measurement.After Googling this problem, someone mentioned checking the clock for the ADC was setup. I believe this should be done on the M7 in the SystemClock Config:void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};  

Hi,If I create a C++ STM32CubeIDE project the main generated file is a C file (main.c) and I have to rename this to main.cpp every time I update pinmux, drivers, etc in order to call C++ functions. I think it's not an usual workflow but could anyone confirm this?gaston

Hi,I have a project with STM32F030F4P6. The project works well, but I would like some modification on the code. The source of code came from GitHUB.Can anyone tell me, How can I edit the files, modify it and rebuild a new .bin file?The folder contains .h and .c files .uvopt and .uvproj files.If you know the solution, please send a short step by step for me.Thank you.Tony

..

..

..

Somehow my STM32CubeIde does not allow to put breakpoint at any project see attached picture.I've read that this issue can be caused by too many projects on workspecae - I reduced the number of worspace procect but still does not workI thinks that I have set something that it disable breakpoint for all existing projectsI tought that was IDE issue - I have upgraded the IDE from 1.8.0 to 1.9.0 - It does not helpAny Idea how can I return the breakpoint functionality.Thanks in advance,

Before upgrade CubeIDE I make "sudo apt-get update && sudo apt-get upgrade -y"CubeIDE says:An error occurred while uninstallingsession context was:(profile=STM32CubeIDE, phase=org.eclipse.equinox.internal.p2.engine.phases.Uninstall, operand=[R]org.eclipse.cdt_root 9.11.1.202006011430 --> null, action=org.eclipse.equinox.internal.p2.touchpoint.natives.actions.CleanupzipAction).Backup of file /opt/st/stm32cubeide_1.6.1/notice.html failed.File that was copied to backup could not be deleted: /opt/st/stm32cubeide_1.6.1/notice.html

HelloI have just updated STM32CubeIDE from 1.8 to 1.9. Unfortunately I can't compile the project in version 1.9 anymore.Errors occurred during the build.Errors running builder 'CDT Builder' on project 'STM32_Main'.java.lang.NullPointerExceptionAnyone else with this problem?(The IDE runs on Windows 10)

problem:this occurs when i launch the debugger "Break at address "0xfffffffe" with no debug information available, or outside of program code". when i click on resume debug then its like i disconnected the jtag it says "Target is not responding, retrying..." and then shutdown..... then says EXIT.

Running on Nucleo-L4P5ZGUsing STM32 Cube IDE (updated today 11.03.2022)When I build my code on my computer I get 0 errors (some warnings)I tried to debug the code on the board, and when I try to do some stuff with an SD card I have attached I get the following messages in the consoleGDB session, device event: 3GDB session, device event: 3GDB session, device event: 1GDB session, device event: 1GDB session, device event: 0GDB session, device event: 0NVIC_DFSR_REG = 0x00000009 While the debugger goes to HardFault_Handler(void) in the stm32l4xx_it.c fileWhere can I find what the BDB session, device event X means?I can post more of the code if that is necessary to understand the question

If I create a C++ STM32CubeIDE project the main generated file is a C file (main.c) and I have to rename this to main.cpp every time I update pinmux, drivers, etc in order to call C++ functions.This bug is confirmed by another user that proposes a workaround. Meanwhile I think STM32CubeIDE team could fix it in next release.gaston

When I move my cursor over the document tabs in CueIDE the tabs go blank and sometimes disappear. Please see video.I have done the following to get Eclipse to work on my pc:Compatibility settings to scale menu and toolbar to reasonable size - The relevant details of my PC are:Operating SystemWindows 10 Professional (x64) Version 1511 (build10586.318)Install Language: English (United States)System Locale: English (Australia)Installed: 10/05/2016 7:26:20 AMServicing Branch: Current Branch (CB)Boot Mode: Legacy BIOS in UEFI (Secure Boot notsupported)Processor a3.00 gigahertz Intel Core i7-5960X512 kilobyte primary memory cache2048 kilobyte secondary memory cache20480 kilobyte tertiary memory cache64-bit readyMulti-core (8 total)Hyper-threaded (16 total)Main Circuit Board bBoard: ASRock X99 Extreme6/3.1Serial Number: M80-57009900064Bus Clock: 100 megahertzUEFI: American Megatrends Inc. P1.20 12/17/2015DisplayNVIDIA GeForce GTX 980 Ti [Display adapter] (2x) May 2009)LCD Screens 2 X 384

int _write(int file, char *ptr, int len) { int i = 0; for (i = 0; i < len; i++) ITM_SendChar((*ptr++)); return len;}uint8_t private[32] = { 0 };uint8_t public[64] = { 0 };using uECC_make_key generate public and private keysprintf(public[0]); /* warning : passing argument 1 of 'printf' makes pointer from integer without a cast */

I upgraded to v1.8 and realized that my programs cannot be downloaded anymore to my discovery STM32L5 board. The error message says:Erasing memory corresponding to segment 0:Erasing internal memory sectors [0 9]Download in Progress:Error: Fail to write buffer in flashError: failed to erase memoryUpto that message all other status messages looks fine. I assume it is related to ST-LINK GDB server. Version 6.0.0 because in STM32Cube IDE this was version 5.x.x.The STM32Programmer is still able to download to the board. If I connect the STM32Programmer right after an unsuccessful download of STM32CubeIDE I can see that parts of the memory get deleted but not programmed correct afterwards (see screenshot attached). The first 8 Bytes are correct. After that only erased memory cells are shown.Would be great if this can be fixed soon.Best RegardsMarkus

Throws this incredibly descriptive error:Errors occurred during the build. Errors running builder 'CDT Builder' on project 'App'. java.lang.NullPointerExceptionI tried cleaning and re-importing the project, and the error persists. If I go back to v1.8.0, it works fine. Anyone have a work around for this?

Hi, everyoneI use stm32f429ZI (180MHz)​​The setting contents were attached to the file​Any advice would be appreciated​Best regards,​​​

HiWhen I try to open the .ioc file associated with my project from within the STM32CubeIDE, I get the following error:Invalid Input: 'FreeRTOS_Test_001.ioc' file content is not supported.   This file has been generated with STM32CubeMX version '6.4.0'.Your current STM32CubeMX version is '6.3.0'. Please check for update: Help > Check for UpdatesCubeIDE is obviously pointing to an older version than the version CubeMX version (6.4) that I opened from my desktop to create the project in the first place.How can I fix this?Best regardsRob

This has been asked before but no response from ST. Does STMCubeIDE support ETM tracing or not? If so, does it support this board and the J-Trace Pro?

STM32CubeIDE 1.9.0 was released today on st.com as well as an in-tool update patch.Caution: The in-tool update does not allow updating debug probe drivers and ST-LINK server tool. Full installer is required for this.What is new in 1.9.0?Target support updated in-sync with STM32Cube ecosystem in general. In particular:New STM32C0xxxx devicesNew STM32U5xxxx devicesNew STM32C0116-DK and STM32C0316-DK Discovery kitsIntegration of STM32CubeMX 6.5.0, STM32CubeProgrammer 2.10.0Eclipse® update 2021-12GCC updateGCC-10 bundled as default toolchainSee porting to doc: https://gcc.gnu.org/gcc-10/porting_to.htmlKnown issues fixed and problems and limitationsPlease refer to the wiki.Where do I obtain STM32CubeIDE 1.9.0?https://www.st.com/stm32cubeide... Or update your current installation of STM32CubeIDE using: Help > Check for updatesCaution: After updating STM32CubeIDE, the post-update restart fails. STM32CubeIDE must be restarted manually.

Hello,I am working on Nucleo-h745ziq board.I have to configure the ADM1032 which is temperature sensor and SMBUS compatiable IC.How I can configure the SMBUS in STM32CUBIDE.Which libabry that I have to use.Can you help me.

How to convert uint8_t and Char arrays to string and int ?How can I use ( .substring(0,7)) function in STM32CubeIDE ?

Hi, i´m beginner in the world of stm32, I have a question, i have a nucleo-f429zi, when i try to program my board in STM32CubeIDE following the steps in any video my nucleo board don’t do anything, but when I program it a simple bink of led in Keil Studio on line, yes it’s functional, Do you know why i have that problem?

Hello,I'm wondering what is general criteria to set a tick source?for example I have two different boards NUCLEO-64 based on STM32F411 and STM32F429I-DISC1 and when i tried to generate a project using the STMCubeIDE, the tool used TIM6 as a source of ticks and to override the one exist in the HAL layer for the STM32F429I-DISC1 while it used the one defined by the HAL for the STM32F411.any idea?Thanks,Mohammed