Posted on May 17, 2011 at 13:02So I've come to a bit of a roadblock. We are trying to do a Bulk Write and Read basing it off of the Mass Storage demo provided in um0424 and find that the Bulk Read interrupt is never triggered. We used libUSB to crea...
Posted on May 17, 2011 at 13:00Hello, So I am running the Mass Storage Demo and have successfully loaded it to the STM3210E-EVAL board and have been able to detect the Eval board as a mass storage device. However, after downloading to flash onto my ...
Posted on May 17, 2011 at 12:55I am trying to integrate the Real-Time Agent into my RTX_Config.c file so that i can use Labview to control this particular Microcontroller. I noticed that there are is an example in: C:\Keil\ARM\RT Agent\RTX\STM32F10X...
Posted on May 17, 2011 at 12:55To control the STM32F103RE chip, i am thinking I would be able to load whatever I made onto my design with just a USB and JTAG connector (like those on the STM eval boards). However, when working further, i found that ...
Posted on May 17, 2011 at 12:53Just a follow up... I was a little confused when i read that an internal 1.8V regulator is used for digital logic, so thats where this thread stemmed from. Conclusion...When stepping through the program, i do see a sol...
