About Name

Name · 2024-07-23

Hey,I have two problems regarding custom clusters and sleepy end devices. I want to create an SED that periodically sends custom long string messages (via attribute reporting) to a coordinator.1.Question:For this I implemented a custom cluster with a...

Name · 2024-08-26

Hello Ouadi,I found a possibility to read the serial output from the micromod development board.I started with a fresh project to eliminate possible errors or incompatibilities from the old project.First, I set up only the standard USART1 output on S...

Name · 2024-08-19

Hey Ouadi,Newest RFD Zigbee stack is flashed. I copied the settings from the Zigbee_OnOff_Client_SED example, including all pinout&config, clock, project manager. No output on the serial. I also tried uploading the example project directly, which giv...

Name · 2024-08-19

Hey,I got my hands on a Nucleo STM32WB55RGV6 MCU and tried to get a simple example with activated Zigbee and Log to run. USART1 is working fine via the debugger as long, as Zigbee is not activated in CubeMX. I tried switching on and off the recommend...

Name · 2024-08-12

Hello Ouadi,I have to apologize. I am working on a MicroMod Main Board and apparently the RX and TX lines are routed to an external connector, so I am not able to receive any logs from the device without further hardware. Is there any way to get some...

Name · 2024-08-12

I followed the instructions given in the configuration interface.Best regards

User statistics

User Activity

Zigbee end device not waking up in sleep mode

Re: Zigbee end device not waking up in sleep mode

Re: Zigbee end device not waking up in sleep mode

Re: Zigbee end device not waking up in sleep mode

Re: Zigbee end device not waking up in sleep mode

Re: Zigbee end device not waking up in sleep mode