About asadullah4571

asadullah4571 · 2024-09-23

Hi ,I try to connect my Pendrive to USB Hub port, but it is not connecting, when ever i remove the touch panel from the slot, then my Pendrive detected . i am using the stm32mp157f-dk2 (custom board ). after removing touch panel, my Pendrive detected...

asadullah4571 · 2024-09-14

Hi , i am using the stm32mp157DAC processor , where in custom board i added the emmc with SDMMC2, in my hardware there is 3 bootpin, boot0 boot1 boot2 .i did changes in u-boot DTSi did changes in Linux DTS only in u-boot DTS i added this line in SDM...

asadullah4571 · 2024-09-09

Hi i am struggling in how to boot from the EMMC not from the SD card , i used the custom board where my emmc is connected to SDMMC2 port , i did changes into the device tree i enable the sdmmc2, but i do not know how to boot from the emmc ?,actually ...

asadullah4571 · 2024-09-06

for custom board of STM32mp157f-dk2 version.the same code i run in the custom board it work but, the error " it stuck in the power supply type C not detected" by Uboot , TFA and OPTEE work fine but in u-boot it stop so i can hand this situation and ...

asadullah4571 · 2024-09-05

hi i need to change the frequency and timing of DDR as well as where i need to modify that one and also after modification how to compile the code.

asadullah4571 · 2024-09-25

Hi @PatrickF i did the changes on local.conf i added this line STM32MP_DT_FILES_EMMC += "stm32mp157f-dk2"then i build the image again, and it generats the images for emmc , and i did flash through the cubeprogrammer to emmc . and i change the bootpin...

asadullah4571 · 2024-09-23

Hi @PatrickF I understand. I know there is no emmc in the stm32mp157f-dk2 board. but i added the emmc in my custom board which is based on stm32mp157-dk2. and i am using the Distribution package.for my custom board i used the same DTS file which is ...

asadullah4571 · 2024-09-22

Hi @PatrickF yes, you are right. right now i am using the stm32mp157f-dk2 image for my custom board. So i found only the sd_card imags (that's why i am using this images ) not the emmc images. so how can i build the emmc image for custom board (stm32...

asadullah4571 · 2024-09-20

Hi @PatrickF now in both linux & u-boot my EMMC is detected you can check the logs , but i try to flash the images on emmc but i got error like mmc 1 not found on STMcubeprogrammer.I edited the tsv file of 157f-dk2. in place of mmc0 i put the mmc1. b...

asadullah4571 · 2024-09-20

Hi @PatrickF I detected the MMC1 in Linux . i unable to detect emmc in u-boot as well as i unable to boot from emmc.I attached the linux, u-boot and tf-a-stm32mp1 dts file whatever i changes in dts files. please check the log , where i am missing Her...

User statistics

User Activity

USB hub did not work after adding the the touch panel Panel (stm32mp157f-dk2)

custom board of STM32mp157f-dk2 , EMMC not detected

how to boot from emmc on stm32mp157

type C power supply not detected by MPU

How to change Frequency for DDR

Re: custom board of STM32mp157f-dk2 , EMMC not detected

Re: custom board of STM32mp157f-dk2 , EMMC not detected

Re: custom board of STM32mp157f-dk2 , EMMC not detected

Re: custom board of STM32mp157f-dk2 , EMMC not detected

Re: custom board of STM32mp157f-dk2 , EMMC not detected